JN0-253 Updated Exam Dumps [2026] Practice Valid Exam Dumps Question
JN0-253 Sample with Accurate & Updated Questions
Juniper JN0-253 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 35
Which two statements correctly describe Mist claim codes and activation codes? (Choose two.)
- A. Activation codes may be used to claim multiple APs at once.
- B. An activation code is printed on a sticker on the AP.
- C. Claim codes may be used to claim multiple APs at once.
- D. Claim codes may be used to claim only one AP.
Answer: A,D
Explanation:
Claim Codes: Claim codes are unique to each AP and can be used to claim only one AP at a time. This ensures each device is correctly registered and managed individually within the Mist system.
Activation Codes: Activation codes can be used to claim multiple APs at once, facilitating bulk onboarding and simplifying the setup process for large deployments.
NEW QUESTION # 36
What does the icon in the lower-right corner of the exhibit do in the Mist UI?
- A. It opens the Marvis site map.
- B. It opens the Marvis Actions interface.
- C. It opens the Marvis Virtual Assistant.
- D. It opens the Marvis Query interface.
Answer: C
NEW QUESTION # 37
According to Juniper Networks, what are two best practices for AP placement (excluding AP12) for optimal accuracy and stability of location-based services? (Choose two.)
- A. Enable a wireless mesh.
- B. Each AP should have an unobstructed fine of sight to at least two other APs.
- C. Mount the AP on the ceiling with the LED facing the floor.
- D. Mount the AP above the ceiling, the LED orientation does not matter.
Answer: B,C
Explanation:
Line of Sight: For optimal accuracy and stability of location-based services, each access point (AP) should have an unobstructed line of sight to at least two other APs. This ensures robust triangulation and accurate location tracking.
Ceiling Mounting: Mounting APs on the ceiling with the LED facing the floor is recommended.
This position provides the best coverage and performance for both Wi-Fi and BLE signals, essential for reliable location services.
NEW QUESTION # 38
You are creating a new site in the UI.
What are three required configuration settings in this scenario? (Choose three.)
- A. Country
- B. Location
- C. Site Name
- D. Active Hours
- E. RF Template
Answer: A,B,C
Explanation:
When creating a new site in the Juniper Mist User Interface, the three required configuration settings are Site Name, Country, and Location. According to Juniper Mist's official configuration guides: "At a minimum, enter the name, time zone, and location..." The 'Information' section of site setup requires the Site Name (a descriptive name to identify the site), Country (which sets regulatory and RF domain requirements), and Location (address or geo-coordinates for the site). These form the basis of the site identity in the Mist cloud and are mandatory for dashboard visibility, compliance, and baseline RF configuration. An RF Template, though critical for wireless tuning, is optional and can be assigned post-site creation. Active Hours are not required for the default site setup and are related to scheduling analytics or location-based services, not to the core creation workflow.
Reference:Juniper Mist Configure a Site , Site Configuration Settings Guide , Mist Management Guide
NEW QUESTION # 39
Which Juniper Mist product enables the onboard Bluetooth Low Energy (BLE) antenna array for listen-only mode?
- A. Asset Visibility
- B. Wi-Fi Management and Assurance
- C. vBLE Engagement
- D. Access Assurance
Answer: A
Explanation:
InJuniper Mist's Location-Based Services, theAsset Visibilityservice utilizes the built-inBluetooth Low Energy (BLE)antenna array within Mist Access Points to track BLE tags and devices inlisten-only mode.
This allows the APs to receive BLE signals emitted by assets and compute their real-time location usingangle- of-arrival (AoA)andRSSI-based triangulation.
According to theJuniper Mist Asset Visibility and Location Services Guide:
"When operating in Asset Visibility mode, the vBLE antenna array in Mist Access Points functions in listen- only mode, collecting BLE chirps from asset tags and relaying this data to the Mist Cloud for location determination." This configuration differs fromvBLE Engagement, where APs transmit BLE beacons to interact with mobile apps. InAsset Visibility, the BLE array passively listens to track tagged assets (e.g., equipment, IoT devices) across a defined floor map.
Therefore, the correct answer isD. Asset Visibility.
References:- Juniper Mist Asset Visibility and Location-Based Services Configuration Guide- Juniper Mist vBLE Architecture Overview- Juniper Mist Cloud Location Services Documentation
NEW QUESTION # 40
In the Latest Updates section of Marvis Actions, an issue might be classified as one of which three states? (Choose three.)
- A. Active
- B. Resolved
- C. AI Validated
- D. Intermittent Issue
- E. Reoccurring Issue
Answer: B,C,E
NEW QUESTION # 41
Which two components make up a self-driving AI network? (Choose two.)
- A. telemetry
- B. human interface
- C. support tickets
- D. actions
Answer: A,D
Explanation:
A self-driving AI network is comprised of two foundational components: actions and telemetry. According to Juniper's own communications, "Marvis AI analyzes telemetry across the wired, wireless, WAN and data center domains, and creates automated workflows to simplify operations and lower costs. Agentic AI:
Accelerating self-driving operations." Telemetry provides real-time continuous data and metrics from the network, including client, device, and application health, enabling the AI engine to build a current, actionable state model. Actions refer to proactive, automated tasks performed by the AI, such as remediating misconfigured ports, resolving anomalies, optimizing performance, and self-healing operations-"Expanded Self-Driving Actions... the Marvis Actions dashboard now supports the autonomous remediation of more network issues." Human interface and support tickets are beneficial for management and support, but the core capabilities of a self-driving AI network are telemetry (data/observability) and actions (automation
/remediation).
Reference:HPE Juniper Networking Self-Driving Network Overview
NEW QUESTION # 42
Which two statements are correct about the switch configuration hierarchy in Juniper Mist? (Choose two.)
- A. The switch-specific configuration cannot override switch templates.
- B. The switch templates exist at the site level.
- C. The switch configuration cannot be managed at the organization level.
- D. The switch templates exist at the organization level.
Answer: B,D
Explanation:
TheJuniper Mist Wired Assuranceplatform uses ahierarchical configuration modelto manage switch settings efficiently across organizations and sites. This hierarchy provides flexibility by allowing administrators to applyglobal configurationsthrough templates at theorganization level, while also permitting site-specific customizations.
According to theJuniper Mist Wired Assurance Configuration and Template Management Guide, the configuration hierarchy functions as follows:
"Switch templates can be created at both the organization and site levels. Organization-level templates define global configurations, while site-level templates provide location-specific customization that overrides the organization-level settings where applicable." This structure enables consistent policy deployment while preserving site autonomy for unique configurations. For example, global VLAN or QoS configurations can be managed at the organization level, and local templates can adjust settings for switch ports or device groups at specific sites.
Switch-specific overrides are allowed within the hierarchy, ensuring flexibility in cases where unique port or feature configurations are required.
Therefore:
* Bis correct because switch templates exist at theorganization levelfor global use.
* Cis correct because switch templates also exist at thesite levelfor localized adjustments.
References:- Juniper Mist Wired Assurance Configuration and Template Management Guide- Juniper Mist Cloud Hierarchical Configuration Documentation- Juniper Mist Wired Assurance and EX/QFX Management Overview
NEW QUESTION # 43
What are two requirements for a WebSocket call? (Choose two.)
- A. WebSocket configuration
- B. encryption token
- C. WebSocket connection URL
- D. authentication token
Answer: C,D
NEW QUESTION # 44
In the Mist UI, what are two Marvis Actions for the AP category? (Choose two.)
- A. Coverage Hole
- B. High CPU
- C. Health Check Failed
- D. MTU Mismatch
Answer: A,C
Explanation:
Coverage Hole: Marvis Actions can identify coverage holes where the wireless signal is weak or absent, indicating potential areas that need additional access points or adjustments.
Health Check Failed: This action indicates that the health check, which monitors the performance and connectivity of an access point, has failed, suggesting issues that need to be addressed.
NEW QUESTION # 45
In the Mist UI, which part of the system platform provides information about missing VLANs?
- A. Service-Level Exceptions
- B. Events
- C. Marvis Actions
- D. Switch Insights
Answer: C
Explanation:
System Platform Components in Mist UI:
Different components provide various insights and information about the network.
Component Descriptions:
Switch Insights: Provides detailed information about switch performance and status. Events: Logs and displays events occurring in the network but does not specifically highlight missing VLANs.
Marvis Actions: AI-driven insights and recommendations that include identifying and suggesting actions for missing VLANs.
Service-Level Exceptions (SLEs): Monitor and report on performance metrics, not specifically focused on VLAN issues.
NEW QUESTION # 46
What are two requirements to use the Wired Visibility option of Juniper Mist Wireless Assurance?
(Choose two.)
- A. The SNMP protocol must be configured on the switch.
- B. A cloud-ready switch must be deployed in the network.
- C. The LLDP protocol must be configured on the switch.
- D. A Mist AP must be deployed in the network.
Answer: C,D
Explanation:
The Wired Visibility feature in Juniper Mist relies on Mist APs to gather insights about wired network devices. The APs act as sensors to collect data from connected switches and devices.
LLDP (Link Layer Discovery Protocol) is required for discovering neighboring devices, identifying switch port details, and enabling Wired Visibility to provide comprehensive insights.
NEW QUESTION # 47
Mist cloud supports single sign-on in which two scenarios? (Choose two.)
- A. admin login to the Mist portal
- B. account login used for NETCONF
- C. Wi-Fi guest login access
- D. account login used for the RESTful API
Answer: B,D
NEW QUESTION # 48
Your existing environment has Cisco wireless access points (APs) that use preshared keys to authenticate wireless users. You are asked to enable Juniper Mist Access Assurance for 802.1X (RADIUS) user authentication on these Cisco APs.
How would you accomplish this task?
- A. Configure a new 802.1X SSID on the Cisco AP that references your Juniper Mist Edge as the RADIUS server. Add an authentication rule to permit user access in Access Assurance.
- B. Configure a new 802.1X SSID on the Cisco AP that references Juniper Mist Access Assurance as the RADIUS server. Add an authentication rule to permit user access in Access Assurance.
- C. Use only third-party access points with Juniper Mist Access Assurance.
- D. Configure a new 802.1X SSID on the Cisco AP and configure a RADSEC tunnel from the AP to Juniper Mist Access Assurance. Add an authentication rule to permit user access in Access Assurance.
Answer: A
Explanation:
To enable Juniper Mist Access Assurance for 802.1X (RADIUS) authentication with Cisco APs, the correct approach is to configure a new 802.1X SSID on the Cisco AP referencing your Juniper Mist Edge as the RADIUS server (option C). According to Juniper Mist's official documentation and architecture guides: "Mist Access Assurance supports end-client authentication on third-party infrastructure by leveraging the Mist Auth Proxy application running on a Mist Edge platform. Third-party devices, such as Cisco APs, are added as RADIUS clients at Mist Edge. The Mist Edge proxy handles all RADIUS authentication traffic from the APs, wraps these authentication requests into a secure RadSec tunnel, and relays them to the Mist Access Assurance cloud for validation against configured authentication rules." This deployment does not require direct RADSEC tunneling from Cisco APs to Mist Access Assurance (since Cisco APs are not natively RADSEC capable) but uses Mist Edge as an intermediary RADIUS server and authentication proxy. "Add an authentication rule in Access Assurance to permit user access," enabling centralized management and policy enforcement in the Mist Cloud.
Reference:Juniper Mist Access Assurance Guide; Authentication Proxy: Third-Party Device Support; Access Assurance Getting Started Guide
NEW QUESTION # 49
Which statement about microservices is correct?
- A. Microservices communicate with each other using Network Configuration Protocol (NETCONF).
- B. Microservices are developed as a complete application set, and updates require the modification of the entire application.
- C. Microservices are designed to be independent to ensure that if one process fails, the remaining processes will continue to operate.
- D. Microservices must share a common database to ensure data integrity.
Answer: C
Explanation:
TheJuniper Mist Cloudarchitecture is built on amicroservices-based design, which enhances reliability, scalability, and operational efficiency. Each microservice performs a specific function-such as authentication, telemetry ingestion, analytics, or AI inference-independently of other components.
According to theJuniper Mist Cloud Architecture and Operations Guide:
"Mist Cloud leverages a microservices architecture where each service operates independently. This design ensures that a failure in one service does not impact the functionality or availability of others." This modular approach provides several key advantages:
* Fault isolation:One component can fail or restart without affecting the rest of the system.
* Independent scaling:Services can scale dynamically based on demand.
* Continuous updates:New features and patches can be deployed without downtime.
Options B, C, and D are incorrect because Mist microservices do not rely onNETCONFfor internal communication, arenot monolithic, and donot share a single common database-each maintains its own data model as required.
Therefore, the correct answer isA. Microservices are designed to be independent to ensure that if one process fails, the remaining processes will continue to operate.
References:- Juniper Mist Cloud Architecture and Operations Guide- Juniper Mist AI Platform and Microservices Overview- Juniper Mist Cloud Fundamentals Study Guide
NEW QUESTION # 50
Which statement is true about wireless security?
- A. Juniper APs use the 5-GHz radio to scan for rogue and honeypot APs.
- B. Juniper APs use the 2.4-GHz radio to scan for rogue and honeypot APs.
- C. Juniper APs have a dedicated radio to scan for rogue and honeypot APs.
- D. Juniper APs use the BLE radio to scan for rogue and honeypot APs.
Answer: C
Explanation:
The correct statement is that Juniper APs have a dedicated radio to scan for rogue and honeypot APs. The official Juniper Mist documentation specifies: "Juniper APs include a dedicated scanning radio to detect rogue, neighbor, and honeypot APs and their clients... The dedicated scanning radios operate on 2.4, 5, and 6 GHz Wi-Fi bands." This third radio operates independently from the client-serving radios and enables continuous threat detection on all Wi-Fi bands, enhancing security and allowing real-time performance adjustments. BLE radios are used for location-based services and asset tracking, not for rogue AP detection.
Client-serving radios can also scan, but detection is always enabled and optimized by the dedicated radio.
Reference:Rogue, Neighbor, and Honeypot Access Points | Mist Juniper Mist Wireless Assurance Configuration Guide
NEW QUESTION # 51
......
Pass Juniper JN0-253 Premium Files Test Engine pdf - Free Dumps Collection: https://www.getvalidtest.com/JN0-253-exam.html
JN0-253 Exam Info and Free Practice Test | GetValidTest: https://drive.google.com/open?id=115azI6F4wZKAHT1dMbRMvwRzXq2rTH1z