[Mar-2026] 156-215.81 Dumps are Available for Instant Access using GetValidTest
156-215.81 Dumps 2026 - New CheckPoint 156-215.81 Exam Questions
NEW QUESTION # 201
Fill in the blank Backup and restores can be accomplished through
- A. SmartConsole, WebUI. or CLI
- B. WebUI. CLI. or SmartUpdate
- C. CLI. SmartUpdate, or SmartBackup
- D. SmartUpdate, SmartBackup. or SmartConsole
Answer: A
Explanation:
Explanation
Backup and restores can be accomplished through SmartConsole, WebUI, or CLI. SmartUpdate and SmartBackup are not valid options1.
References: 1: Check Point R81 Security Management Administration Guide, page
NEW QUESTION # 202
You believe Phase 2 negotiations are failing while you are attempting to configure a site-to-site VPN with one of your firm's business partners.
Which SmartConsole application should you use to confirm your suspicious?
- A. SmartView Status
- B. SmartDashboard
- C. SmartView Tracker
- D. SmartUpdate
Answer: C
NEW QUESTION # 203
Which of the following is NOT supported by Bridge Mode on the Check Point Security Gateway?
- A. Antivirus
- B. Application Control
- C. Data Loss Prevention
- D. NAT
Answer: D
Explanation:
Explanation
Bridge Mode is a deployment option for Check Point Security Gateway that allows it to act as a transparent bridge between two network segments, without changing the IP addressing scheme. Bridge Mode supports most of the security features, such as Data Loss Prevention, Antivirus, Application Control, etc. However, Bridge Mode does not support NAT, because NAT requires modifying the IP addresses or ports of the packets, which contradicts the transparent nature of Bridge Mode1. References: Check Point R81 Security Gateway Technical Administration Guide
NEW QUESTION # 204
How are the backups stored in Check Point appliances?
- A. Saved as*tgz under /var/CPbackup
- B. Saved as*tar under /var/CPbackup
- C. Saved as*tgz under /var/log/CPbackup/backups
- D. Saved as*.tar under /var/log/CPbackup/backups
Answer: A
Explanation:
The backups are stored in Check Point appliances as *.tgz files under /var/CPbackup. This is the default location for backup files created by the backup command. Therefore, the correct answer is B. Saved as *.tgz under /var/CPbackup
NEW QUESTION # 205
A network administrator has informed you that they have identified a malicious host on the network, and instructed you to block it. Corporate policy dictates that firewall policy changes cannot be made at this time. What tool can you use to block this traffic?
- A. Suspicious Activity Monitoring (SAM) rules
- B. Anti-Malware protection
- C. Policy-based routing
- D. Anti-Bot protection
Answer: A
Explanation:
https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_LoggingAndMonitoring_AdminGuide/Topics-LMG/Monitoring-Suspicious-Activity-Rules.htm
NEW QUESTION # 206
Which is a main component of the Check Point security management architecture?
- A. Proxy Server
- B. SmartConsole
- C. Endpoint VPN client
- D. Identity Collector
Answer: B
Explanation:
Explanation
A main component of the Check Point security management architecture is SmartConsole2. SmartConsole is a unified graphical user interface that allows administrators to manage multiple security functions such as firewall, VPN, IPS, application control, URL filtering, identity awareness, and more. SmartConsole connects to the Security Management Server and interacts with other Check Point components such as Security Gateways and Endpoint Security Servers. References: Check Point R81 Security Management Administration Guide
NEW QUESTION # 207
Which Security Blade needs to be enabled in order to sanitize and remove potentially malicious content from files, before those files enter the network?
- A. Threat Emulation
- B. Anti-Virus
- C. Threat Extraction
- D. Anti-Malware
Answer: C
Explanation:
Threat Extraction is the Security Blade that needs to be enabled in order to sanitize and remove potentially malicious content from files, before those files enter the network. It can strip out active content, embedded objects, and other risky elements from documents and deliver a safe version of the file to the user. References: Remote Access VPN R81.20 Administration Guide, page 18.
NEW QUESTION # 208
What is the Transport layer of the TCP/IP model responsible for?
- A. It defines the protocols that are used to exchange data between networks and how host programs interact with the Application layer.
- B. It transports packets as datagrams along different routes to reach their destination.
- C. It deals with all aspects of the physical components of network connectivity and connects with different network types.
- D. It manages the flow of data between two hosts to ensure that the packets are correctly assembled and delivered to the target application.
Answer: D
NEW QUESTION # 209
At what point is the Internal Certificate Authority (ICA) created?
- A. When an administrator decides to create one.
- B. Upon creation of a certificate
- C. When an administrator initially logs into SmartConsole.
- D. During the primary Security Management Server installation process.
Answer: D
Explanation:
Introduction to the ICA
The ICA is a Certificate Authority which is an integral part of the Check Point product suite. It is fully compliant with X.509 standards for both certificates and CRLs. See the relevant X.509 and PKI documentation, as well as RFC 2459 standards for more information. You can read more about Check Point and PKI in the R76 VPN Administration Guide.
The ICA is located on the Security Management server. It is created during the installation process, when the Security Management server is configured.
NEW QUESTION # 210
Fill in the blanks: The Application Layer Firewalls inspect traffic through the ______ layer(s) of the TCP/IP model and up to and including the ______ layer.
- A. First two; Internet
- B. Upper; Application
- C. First two; Transport
- D. Lower; Application
Answer: D
Explanation:
Explanation
The Application Layer Firewalls inspect traffic through the Lower layer(s) of the TCP/IP model and up to and including the Application layer. The lower layers are the Physical, Data Link, and Network layers, which deal with the transmission and routing of packets. The Application layer is the highest layer of the TCP/IP model, which provides services and protocols for specific applications such as HTTP, FTP, SMTP, etc. The Application Layer Firewalls can inspect the content and context of the traffic and enforce granular security policies based on various criteria such as user identity, application identity, content type, etc. References:
[Check Point R81 Firewall Administration Guide]
NEW QUESTION # 211
Which of the following licenses are considered temporary?
- A. Plug-and-play and Evaluation
- B. Perpetual and Trial
- C. Subscription and Perpetual
- D. Evaluation and Subscription
Answer: A
Explanation:
Should be Trial or Evaluation, even Plug-and-play (all are synonyms ). Answer B is the best choice.
NEW QUESTION # 212
Which of the following is NOT a role of the SmartCenter:
- A. Certificate authority
- B. Address translation
- C. Policy configuration
- D. Status monitoring
Answer: B
Explanation:
Address translation is not a role of the SmartCenter, as it is performed by the Security Gateway based on the NAT policy configured in the SmartConsole5. The other options are roles of the SmartCenter, as it is responsible for status monitoring, policy configuration, and certificate authority for the Security Gateways5.
References: Gaia R81.10 Administration Guide, QUANTUM SECURITY MANAGEMENT R81, Remote Access VPN R81 Administration Guide
NEW QUESTION # 213
What is the default shell for the command line interface?
- A. Expert
- B. Clish
- C. Normal
- D. Admin
Answer: B
Explanation:
https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_Gaia_AdminGuide/Topics-GAG/Gaia-Clish-Commands.htm
NEW QUESTION # 214
A client has created a new Gateway object that will be managed at a remote location. When the client attempts to install the Security Policy to the new Gateway object, the object does not appear in the Install On check box.
What should you look for?
- A. A Gateway object created using the Check Point > Secure Gateway option in the network objects, dialog box, but still needs to configure the interfaces for the Security Gateway object.
- B. Secure Internal Communications (SIC) not configured for the object.
- C. A Gateway object created using the Check Point > Externally Managed VPN Gateway option from the Network Objects dialog box.
- D. Anti-spoofing not configured on the interfaces on the Gateway object.
Answer: C
NEW QUESTION # 215
Which policy type is used to enforce bandwidth and traffic control rules?
- A. Threat Prevention
- B. Threat Emulation
- C. QoS
- D. Access Control
Answer: C
Explanation:
https://sc1.checkpoint.com/documents/R80.30/WebAdminGuides/EN/CP_R80.30_QoS_AdminGuide/html_frameset.htm?topic=documents/R80.30/WebAdminGuides/EN/CP_R80.30_QoS_AdminGuide/127573
NEW QUESTION # 216
When changes are made to a Rule base, it is important to _______________ to enforce changes.
- A. Activate policy
- B. Publish database
- C. Save changes
- D. Install policy
Answer: B
Explanation:
Explanation
When changes are made to a Rule base, it is important to Publish database to enforce changes5. Publishing database saves the changes to the database and makes them available to other administrators. Installing policy applies the changes to the Security Gateways. References: Check Point R81 Security Management Administration Guide, [Check Point R81 SmartConsole R81 Resolved Issues], [Check Point R81 Firewall Administration Guide]
NEW QUESTION # 217
After a new Log Server is added to the environment and the SIC trust has been established with the SMS what will the gateways do?
- A. The gateways can only send logs to an SMS and cannot send logs to a Log Server. Log Servers are proprietary log archive servers.
- B. The firewalls will detect the new Log Server after the next policy install and redirect the new logs to the new Log Server.
- C. Gateways will send new firewall logs to the new Log Server as soon as the SIC trust is set up between the SMS and the new Log Server.
- D. Logs are not automatically forwarded to a new Log Server. SmartConsole must be used to manually configure each gateway to send its logs to the server.
Answer: D
Explanation:
Explanation
Logs are not automatically forwarded to a new Log Server. SmartConsole must be used to manually configure each gateway to send its logs to the server. After adding a new Log Server and establishing the SIC trust with the SMS, the administrator must use SmartConsole to assign the Log Server to each gateway in the Logs and Masters section of the gateway properties2. The other options are not correct, as gateways can send logs to both SMS and Log Server, Log Servers are not proprietary log archive servers, and gateways will not detect the new Log Server after the next policy install.
NEW QUESTION # 218
......
CheckPoint 156-215.81 Exam Practice Test Questions: https://www.getvalidtest.com/156-215.81-exam.html
Free 156-215.81 Braindumps Download Updated: https://drive.google.com/open?id=1HpveFlwXlPqVHDap4PiMdpDkyagVjumD