MB-335 Pre-Exam Practice Tests | (Updated 197 Questions)
Valid MB-335 Exam Q&A PDF - One Year Free Update
The main subjects covered in the MB-335 exam are planning configuration, manufacturing execution, supply chain management fundamentals, product information management, inventory management, quality management, transportation management, and sales and purchase order management. In addition, the candidate is expected to know how to use the application's different tools and features to optimize the supply chain management process. The passing score for MB-335 exam is 700 out of 1000 points, and the candidate has a maximum of 180 minutes to complete it.
NEW QUESTION # 70
You need to configure the system to meet the order requirements for unscented cleaning solution. Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Ensure that the PSDS file is active and within the expiration date requirements.
- B. Add the ingredients for unscented cleaning solution to a regulated products inclusion list
- C. On the inventory management parameters, set the value for the Print Product Safety Data Sheet and Prevent Sales Pack Slip/Invoke Posting to TRUE
- D. In Document Handling, associate the PSDS file with the PSDS record and set restriction field set to Internal
- E. Configure the ingredient as a restricted and regulated product.
Answer: B,C,E
NEW QUESTION # 71
A company produces homeopathic lotions for pain relief. The lotions use a combination of ProductA and ProductB. ProductA is the primary ingredient. You use Products to adjust the concentration of active ingredients in the lotion. ProductC represents the remainder.
You need to ensure that the lotion final product has a consistent concentration of anti-inflammatory agents.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Set the formula line type of ProductC to None
- B. Set the formula line type of ProductA to Active.
- C. Set the formula line type of ProductB to Compensating
- D. Set the formula line type of ProductB to Active
- E. Set the formula line type of ProductA to Compensating
Answer: B,C
Explanation:
The formula line type of an item determines how the item is handled during master planning and batch order production. The Active line type indicates that the item is an active ingredient that has a variable quantity and a fixed potency. The Compensating line type indicates that the item is used to adjust the total quantity of the formula to a fixed amount1.
In this scenario, ProductA is the primary ingredient and ProductB is used to adjust the concentration of active ingredients in the lotion. Therefore, ProductA should have the Active line type and ProductB should have the Compensating line type. ProductC represents the remainder, so it can have any line type except Active or Compensating1.
Setting the formula line type of ProductB to Active or ProductA to Compensating would not ensure that the lotion final product has a consistent concentration of anti-inflammatory agents. Setting the formula line type of ProductC to None would have no effect on the concentration of active ingredients in the lotion1.
NEW QUESTION # 72
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear on the review screen.
A manufacturing company produces electronic components and devices.
The company has scheduling issues related to using working time calendars in manufacturing.
You need to ensure that the working time calendar is used when manufacturing jobs are scheduled.
Solution: Enable automatic consumption of run time.
Does the solution meet the goal?
- A. Yes
- B. No
Answer: B
NEW QUESTION # 73
You need to calculate estimated consumption of ingredients for liquid cleaning solution.
What is the consumption? To answer, select the appropriate option in the answer area.
NOTE:Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 74
You need to set up the state control for sales of motorcycles.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Create an exclusive restricted product list for California and add the motorcycle part to the list.
- B. Create an exclusive restricted product list for Missouri and add the motorcycle part to the list.
- C. Create an inclusive restricted product list for United States and add the motorcycle part to the list.
- D. Create an inclusive restricted product list for United States. Do not add the motorcycle part to the list.
Answer: A,C
Explanation:
Reference:
https://stoneridgesoftware.com/working-with-restricted-products-in-dynamics-365-operations/
NEW QUESTION # 75
You are the production scheduler for a manufacturing company. You have run the Resource Group Capacity report as shown in the Resource Group 21 Capacity exhibit. (Click the Resource Group 21 Capacity tab).
After reviewing that report, you run Resource Capacity reports as shown in the Resource 2101 and 2102 Capacity exhibits. (Click the 2101 Capacity and 2102 Capacity tabs.)
You run the Gantt chart report as shown in the Gantt exhibit to determine the production orders scheduled on the resources. (Click the Gantt tab.)
You need to determine the method to schedule the production lines.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 76
A lean manufacturing company is implementing Dynamics 365 Supply Chain Management.
The manufacturer subcontracts a part of the production process.
Items must support the subcontracting process.
The subcontracted cost must be included in production
You need to configure the production process to meet the subcontracting requirements.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 77
A company overstates on-hand raw materials due to the time it takes to post raw materials as consumed when production orders are processed.
All items used to manufacture finished goods must be consumed when a finished good is reported as finished.
You must not change all bill of materials lines to use the option of flushing principal.
You need to ensure that all production orders consume raw materials at Report as finished.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/production-parameters- manufacturing-execution
NEW QUESTION # 78
You are the product design manager for a computer manufacturer.
Your new laptop model is configurable. There are restrictions on which hardware components can be selected depending on the model. You create configuration groups for hardware and software.
You need to create a new laptop item number and configurations.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION # 79
You must ensure that the firepit product is available for sale. How should the product be released?
- A. Connect the BOM to an engineering product version before release.
- B. Release the engineering product version and then assign the route.
- C. Connect a route to an engineering version before release.
- D. Release the engineering product version and then assign BOM.
Answer: A
NEW QUESTION # 80
A company that assembles packaging material uses Dynamics 36S Supply Cham Management.
The glue that is used in assembly has run out of stock and will not be back in stock as expected. Another adhesive must be substituted for the glue. This will affect orders in planning as well as production orders that have started.
You need to ensure that the substitute adhesive is used in production until the glue is back in stock.
Which configuration should you use for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection Is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 81
You need to configure the system for plastic operations.
Which two parts should be manually reported as finished? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. mold tooling
- B. machined plastic pieces
- C. excess plastic
- D. unmachined plastic pieces
Answer: B,D
NEW QUESTION # 82
You need to resolve the issue for UserB.
What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. Set up configuration and weight for partial visibility.
- B. Create a product master with predefined variants for ounces and boxes.
- C. Set up configuration and weight for full visibility.
- D. Create a catch weight item.
Answer: C,D
NEW QUESTION # 83
You are the production scheduler at a manufacturing company. You schedule estimated production orders and ensure that capacity is used efficiently.
You have an order that must be scheduled at the resource group level and scheduled backward from the delivery date specified on the production order.
You need to schedule the order.
Which scheduling parameters should you use? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/operation-scheduling-options
NEW QUESTION # 84
A company has manufacturing sites that process different types of production orders using highly specialized equipment.
Released production orders have been processing for an excessive amount of time while the system tries to find a viable route that conforms to the constraints specified in the system.
The system must automatically time out if a viable solution is not found after 120 seconds.
You need to configure the automatic timeout.
Which form should you use for each configuration? To answer, drag the appropriate forms to the correct configurations. Each form may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 85
A company implements Dynamics 365 for Finance and Operations. You must use functionality in the system for group production runs to prevent downtime and excessive cleaning of the machines on the production line.
You need to set up the system.
Which behaviors should you expect? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 86
You are the production scheduler at a manufacturing company. You schedule estimated production orders and ensure that capacity is used efficiently.
You have an order that must be scheduled at the resource group level and scheduled backward from the delivery date specified on the production order.
You need to schedule the order.
Which scheduling parameters should you use? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 87
A company makes lubricants and greases that are used in the automotive industry.
The items use the standard cost method. Electricity and heating of the manufacturing building are allocated into the cost of goods based on the size and wattage of the machine used.
You need to ensure that the system is set up to support the cost allocation.
How should you complete the costing sheet configuration? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 88
A company uses distributed hybrid topology within their Dynamics 365 Supply Chain Management system.
The company plans to build a manufacturing plant on a mountain to be closer to a required mineral source. Internet connectivity is unreliable, and availability of bandwidth speed is limited. The company plans to deploy an operational edge scale unit for the plant to address the connectivity issue.
You need to determine where production operations can be performed.
Which method should you recommend?
To answer, drag the appropriate methods to the correct requirements. Each method may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 89
A company makes engine parts used in the automotive industry.
They are in the process of retooling an existing manufacturing plant. They are looking to use Dynamics 365 for Finance and Operations to help support the Bill of Materials (BOM) product lifecycle for engineering version control.
You must translate existing production processes into the proper elements. You need to create BOM lifecycle states to translate existing production processes into the proper elements.
What type of BOM product lifecycle state should you create? To answer, select the appropriate BOM state in the answer area.
Answer:
Explanation:
Explanation:
NEW QUESTION # 90
......
Microsoft MB-335 Exam is designed to test the skills and knowledge of candidates who are aiming to become a Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert. MB-335 exam is intended for those individuals who want to demonstrate their expertise in implementing, configuring, and designing solutions for Microsoft Dynamics 365 Supply Chain Management.
Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert Free Update Certification Sample Questions: https://www.getvalidtest.com/MB-335-exam.html
Trend for Microsoft MB-335 pdf dumps before actual exam: https://drive.google.com/open?id=1ubrMpCM9TBlR985xMOMOkVEM74HVkAFN