New 2022 Realistic Free Oracle 1Z0-1045-20 Exam Dump Questions & Answer
1Z0-1045-20 Practice Test Engine: Try These 72 Exam Questions
Oracle 1Z0-1045-20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
NEW QUESTION 34
Which three interface validations cause the Advance Shipment Notifications (ASN) to fail when uploading to WMS Cloud? (Choose three.)
- A. A Purchase Order that is referenced on the ASN doesn't exist in WMS Cloud.
- B. ASN file has invalid data format.
- C. ASN data is past the shipping date.
- D. ASN Qty and Purchase Qty do not match in WMS Cloud.
- E. Purchase Detail line and ASN Detail line do not match in WMS Cloud.
Answer: B,D,E
NEW QUESTION 35
Your company has two facilities, one in California, and the other in New Jersey.
The California facility needs to exclusively check the quality of each item on receiving whereas the New Jersey one need to exclusively perform Value-Added Service (VAS) on each unit during receiving and shipping.
Identify the Location Types that are required to be defined in the Oracle WMS Cloud to receive the items at the California Facility.
- A. Active and Reserve
- B. Reserve and VAS
- C. Reserve and QC
- D. Active and VAS
Answer: A
NEW QUESTION 36
The following configuration is set for the Advance Shipment Notification type: 10% Under Receipt Warning,
10% Over Receipt Warning, and 20% Over Receipt error.
Which two statements match the condition set if the ASN Qty is 100? (Choose two.)
- A. When the Operator receives 125 units, the RF screen displays an Over Receipt warning message.
- B. When the Operator receives 110, the RF screen displays an Over Receipt warning message.
- C. When the Operator receives 101, the RF screen displays an Over receipt warning message.
- D. When the Operator receives 130 units, the RF screen displays an Over Receipt error message.
- E. When the Operator receives 89, the RF screen displays an Under Receipt warning message.
Answer: B,D
NEW QUESTION 37
Your company's count process has two levels:
* First, at the end of each quarter, the operators will need to get a list of all the LPN numbers in every location via cycle count.
* Second, at the end of each month, the operators will do a spot check for any 100 LPNs and count their content information, and to save time, they will scan each item only once and enter the total quantity of the item marked on the inner package inside an LPN.
Your company has reserve locations only for storage and you're doing the WMS Cloud configuration for the operators. Which two tasks should you complete? (Choose two.)
- A. Create a Resv Nbr Cnt RF screen for the operators to use.
- B. Enable the Recount Location Detail cc_trigger.
- C. Create a Cycle count for LPN deferred/immediate updates RF screen for the operators to use, and set the sku-scan-mode RF parameter to By Qty Scan.
- D. Create a Cycle Cnt RF screen for the operators to use, and leave the content-count RF parameter blank.
- E. Create a Cycle Cnt RF screen for the operators to use, and set the content-count RF parameter to By Sku Qty.
Answer: A,C
NEW QUESTION 38
You want to wave three orders. Two orders had the same route number in the order header, and the other order didn't have a route number. You want to make sure the orders are assigned to the same load.
What should you do or check?
- A. Change company parameter WAVE_ASSIGN_LOAD to One load per wave
- B. If they all have the same "Ship to Name" and "Ship to Address 1", they will be assigned to the same load.
- C. Change the Task selection criteria to be configured to assign by load.
- D. Add another route number to the third order. As long as they are waved together, they will be assigned to the same load.
Answer: A
NEW QUESTION 39
Item X has product life as 40 days and % Acceptable as 40%. You are doing receiving for your company via RF and today is Sep. 15th, 2017. The receiving transaction that you use to receive Item X has left the screen parameter allow-rem-exp-override blank, and has the screen parameter allow-inv-exp-override set to on.
Identify two valid facts. (Choose two.)
- A. When you communicate to the RF that the expiry date of Item X is Oct.20th, 2017, and there's an existing inventory of Item X whose expiry date is Oct.4th, the system will allow to receive it.
- B. When you communicate to the RF that the expiry date of Item X is Oct. 25th, 2017, the system will allow you to receive it.
- C. When you communicate to the RF that the expiry date of Item X is Oct. 10th, 2017, the system will allow you to receive it.
- D. Expiry date is the only date value that you can enter via receiving transactions, but it is optional based on the items configuration.
- E. When you communicate to the RF that the expiry date of Item X is Sep. 30th, 2017, the system will allow you to receive it.
Answer: D,E
NEW QUESTION 40
Which Inventory screen should you use to configure the Inventory Adjustment Code in Oracle WMS Cloud?
- A. Inventory Lock Codes
- B. IB LPNs
- C. Reason Codes
- D. Items
Answer: C
NEW QUESTION 41
Select four true statements about System Directed QC. (Choose four.)
- A. For QC to happen, the vendor has to be configured in the system.
- B. The QC process required the use of Purchase Order.
- C. Once system directed QC is turned on, all receipts go through QC.
- D. How many SKUs are flagged for QC depends on what is specified in the vendor QC Screen.
- E. Items are flagged based on the vendor that sent PO and ASN.
Answer: A,B,C,D
NEW QUESTION 42
Select three statements are true. (Choose three.)
- A. Appointments cannot be used to track lead-time from the trailer's check-in time to the receipt of the first LPN into the system.
- B. Appointments can be used (instead of IB loads) as a way of checking in Loads into the WMS Cloud for receiving.
- C. The Duration as specified cannot be exceeded by the users.
- D. The matching value type and matching value must be specified when the appointment is created.
- E. Appointments are useful for tracking time discrepancies in various metrics such as planned and actual arrival time.
Answer: B,D,E
NEW QUESTION 43
Why is it necessary to have a consolidation location?
- A. Consolidation locations are used to consolidate orders for a wave.
- B. After you are finished picking your pick cart, you use a consolidation location to pack.
- C. Packing using a Distribution transaction requires a consolidation location for each store.
- D. It is necessary if you want to consolidate while packing.
Answer: B
NEW QUESTION 44
What configuration is needed to create Advance Shipment Notifications for a Transfer Order shipped between two facilities configured in the same WMS Cloud environment?
- A. The Facility parameter key AUTOLOAD_and_SHIP should be set to Yes.
- B. Set CREATE_ASN_FOR_EACH_PO to YES at Source and Destination Facility levels.
- C. Set CREATE_ASN_FOR_EACH_PO to YES at the Company level.
- D. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Destination Facility.
- E. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Source Facility.
Answer: D
NEW QUESTION 45
Which three configurations are required to sort the SKU A and B while receiving? (Choose three.)
- A. Putaway Type should be configured for the SKU.
- B. An IB Shipment Type should be created to receive Purchase Order with sort SKUs.
- C. Use Custom Field in Vendor UI to map the item that needs to be sorted.
- D. Break Rule with Criteria needs to be set for the Sorting Rule.
- E. Receive Station Location for Sorting should be created and mapped with the Sorting Rule.
- F. The Locations Size type should be defined for each Receive Station Location.
Answer: A,B,C
NEW QUESTION 46
Your client wants to do flow-through allocations. Which two types of packing transactions achieve this flow?
(Choose two.)
- A. Packlpn
- B. Pick Cart
- C. PackNC
- D. Distribution
Answer: C,D
NEW QUESTION 47
Which two data conditions on the Outbound Order will always result in unsuccessful cross-dock allocations in WMS Cloud? (Choose two.)
- A. The quantity of the item on the Outbound Order is greater than the quantity of the item on the LPN being received.
- B. The quantity of the item on the Outbound Order is exactly equal to the quantity of the item on the LPN being received.
- C. The item on the Outbound Order is a batch tracked item.
- D. The quantity of the item on the Outbound Order is less than the quantity of the item on the LPM being received.
- E. The item on the Outbound Order does not match the item on the LPN being received.
Answer: D,E
NEW QUESTION 48
What is true about emailing a scheduled report?
- A. You cannot customize the subject of the email
- B. The person receiving the email must have an email registered with a username in the system
- C. You can email reports in HTML format
- D. You can add an additional filter for a specific scheduled report
Answer: D
NEW QUESTION 49
You have hired a new employee to do picking in the warehouse. The employee complains that he/she cannot work because the RF Picking transactions is not displayed as one of the RF options.
Which two scenarios will cause the transaction to be missing as an RF option in the user's menu? (Choose two.)
- A. The employee is assigned to the "Supervisor" group.
- B. The RF Picking transaction is not associated with her/his group's assigned RF Menu.
- C. The employee has forgotten his/her password.
- D. The employee's Group has a blank RF Menu.
- E. The employee's email is not set up in his/her user profile.
Answer: B,D
NEW QUESTION 50
Your customer wants to allocate Default Putaway Type and Drop location for the Blind IB LPNs after Putaway.
Select the three configurations required to complete Putaway process. (Choose three.)
- A. Putaway Type should be defined in Putaway Type UI screen at Facility level.
- B. Use Putaway Type defined in Putaway Type UI screen to set PUTAWAY_TYPE Parameter in Company parameter UI Screen.
- C. Set Putaway Priority and Rules in UI Screen at Facility level.
- D. Set DEFAULT_DROP_LOCN Parameter in Facility Parameter UI screen.
- E. Use Putaway Type defined in Putaway Type UI screen to set PUTAWAY_TYPE Parameter in Facility Parameter UI Screen
- F. Set DEFAULT_DROP_LOCN Parameter in Company Parameter UI screen.
Answer: B,C,E
NEW QUESTION 51
......
Guaranteed Success in Oracle Warehouse Management Cloud 1Z0-1045-20 Exam Dumps: https://www.getvalidtest.com/1Z0-1045-20-exam.html