[Nov 18, 2021] Get New CTFL-2018 Certification – Valid Exam Dumps Questions
100% Passing Guarantee - Brilliant CTFL-2018 Exam Questions PDF
What Does CTFL 2018 Exam Include?
CTFL 2018 falls within the Foundation Level and thus emphasizes key concepts the candidates should master to advance their knowledge further. It validates one’s familiarity with the most important testing tools, methods, test management, understanding of the lifecycle of software development, and many others. Once you garner the requisite scores in it, you will be awarded the Certified Tester Foundation Level (CTFL) certification. Having it, you will be able to choose between Agile, Core, and Specialist paths and proceed to the Advanced as well as the Expert Levels.
NEW QUESTION 17
An issue has been found in a production system, where a code component fails to release memory after it has finished using it. Which of the following tools would have been the MOST effective at detecting this defect during Performance testing?
- A. Coverage measurement tool.
- B. Dynamic analysis tool.
- C. Configuration management tool.
- D. Test Execution tool.
Answer: B
NEW QUESTION 18
Which one of the following statements about techniques for estimating test effort is correct?
- A. The metrics-based technique finds the most similar former project and uses its original estimate for the current project.
- B. In an expert-based approach, the test lead with the most years in the role is chosen to produce the estimate.
- C. The expert-based approach is based on the experience of the owners of the testing tasks or by subject matter experts.
- D. The metrics-based technique uses metrics supplied by the current test team based on their subjective feel for effort required.
Answer: C
NEW QUESTION 19
Given the following state transition diagram where SS is the start state:
Which of the following answers describes a test case that only uses valid transitions to exercise all states, using the minimum number of transitions?
- A. SS-S1-S2-S3.
- B. SS-S3-S2-S1.
- C. SS-S3-SS-S1-S3-S2.
- D. SS-S1-S3-S2.
Answer: D
NEW QUESTION 20
A student needs to score at least 50 points to pass. If they score at least 100 points they will achieve a merit and if they score at least 150 points they will achieve a distinction.
Which two values are in the same partition?
- A. 50 and 60.
- B. 45 and 55.
- C. 45 and 170.
- D. 55 and 120.
Answer: A
Explanation:
Explanation
NEW QUESTION 21
Which of the following is a key difference between black box and white box test design techniques?
- A. White box techniques derive test cases from models of the software, black box techniques do not.
- B. White box techniques use functional design specifications to derive test cases, black box techniques do not.
- C. White box techniques can measure the extent of code coverage, black box techniques can not.
- D. Black box techniques use software code to derive test cases, white box techniques do not.
Answer: C
NEW QUESTION 22
Which of the following BEST describes how configuration management supports the test process?
- A. It enables the tester to reproduce the tested item through unique identification and version control.
- B. It helps the test manager to decide how best to integrate and coordinate the testing activities into the software life cycle.
- C. It enables incidents to be tracked from discovery and classification to correction and confirmation of the solution.
- D. It enables the tester to systematically design test conditions, cases and data.
Answer: A
NEW QUESTION 23
Which of the following are product risks?
a) Failure prone software delivered.
b) Software does not perform its intended functions.
c) Insufficient staff available for testing.
d) Test environment not ready on time.
e) Poor data integrity and quality.
- A. b, c and e.
- B. b, c and d.
- C. a, b and e.
- D. b, d and e.
Answer: C
NEW QUESTION 24
Your agile project has scheduled a final sprint before release to fix and re-test all open defects with a priority level of 3 or above.
The following defect report shows the defect fields that are currently being captured on the system.
Title: Unable to add excursions to pre-paid cruises
Date raised: 21/05/18
Author: Emma Rigby
Status: Fixed
What occurred: I went to book an excursion for a pre-paid cruise but received an error message saying,
'Facility not available'. I can book excursions on cruises that have not yet been fully paid.
What should have occurred: Requirement 3.12 says clearly that customers can add excursions after cruises have been fully paid so the facility should have been available (when an additional amount may now need to be paid).
Priority: 2
Software build: 2.1
Test level: System test
Environment details: System test 3
Which of ONE of the following additional defect report fields would be MOST beneficial for the sprint team to add?
- A. Expected results.
- B. Test Script Id.
- C. Severity.
- D. Actual results.
Answer: C
NEW QUESTION 25
Given the following decision tables, what is the expected result for the test case listed below?
Test Case: Purchase a Toaster weighing 9kg for E10.
- A. Must pay in cash, no free delivery.
- B. No need to pay in cash, free delivery.
- C. Must pay in cash, free delivery.
- D. No need to pay in cash, no free delivery.
Answer: D
NEW QUESTION 26
Testing and Debugging are key activities in the software development lifecycle.
Which of the following are DEBUGGING activities?
a) Designing tests to find failures.
b) Locating the cause of failures.
c) Analysing and fixing the defects.
d) Executing tests to show failures.
- A. c and d.
- B. a and b.
- C. a and d.
- D. b and c.
Answer: B
NEW QUESTION 27
When can functional and structural testing BOTH be applied?
- A. System and Component test levels only.
- B. All 'Development' test levels, i.e. those before Acceptance testing.
- C. All test levels.
- D. Component and Component integration test levels only.
Answer: C
NEW QUESTION 28
Testing effort can depend on a number of factors, which one of the following is MOST likely to impact the amount of effort required?
- A. The predicted number of defects and the amount of rework required.
- B. The planned use of a project management tool to schedule tasks.
- C. The responsibilities for testers and developers being clearly defined.
- D. The ratio of developers to testers in the project team.
Answer: B
NEW QUESTION 29
In which development life cycle model is regression testing an increasingly important activity as the project progresses?
- A. Progressive.
- B. Waterfall.
- C. V-model.
- D. Scrum.
Answer: D
NEW QUESTION 30
Which defect below is MOST likely to be found by a review during static testing?
- A. Incorrect interface specifications.
- B. Performance bottlenecks.
- C. Old versions of software in use.
- D. Broken links to web addresses.
Answer: A
NEW QUESTION 31
Which of the following options describe the chain of events in the correct sequence?
- A. Fault, bug, mistake.
- B. Error, fault, failure.
- C. Failure, bug, error.
- D. Mistake, failure, fault.
Answer: B
NEW QUESTION 32
Which of the following options BEST explains the pesticide paradox principle of testing?
- A. Repeatedly running a set of tests will ensure that a system is defect free.
- B. Testing, like spraying pesticide, is an effective bug/defect removal activity.
- C. If we do not regularly review and revise our tests, we'll stop finding defects.
- D. Defects are, paradoxically, often contained in a small number of modules.
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 33
Which of the following are triggers for Maintenance testing?
a) System migration from one platform to another.
b) Retirement of a system.
c) Preparation for an audit of a system.
d) Modifications to a system.
e) Development of a whole new system.
- A. b, c and e.
- B. a, d and e.
- C. a, c and d.
- D. a, b and d.
Answer: C
NEW QUESTION 34
Which of the following would achieve the HIGHEST level of testing independence for a project's system test level?
- A. Training developers to design good tests for the test team to execute.
- B. Having the company's independent test team design and execute the tests.
- C. Outsourcing test design and execution to a different company.
- D. Minimising contact between testers and developers during test design to avoid bias.
Answer: A
NEW QUESTION 35
......
How Does CTFL 2018 Exam Look Like?
During the ISTQB CTFL 2018 test, the candidates will be answering 40 MCQs within a span of 1 hour. In case English is not your native language, you’ll be given 75 minutes instead of 60. If you get 65%, you’ll have passed it while anything below that percentage means you’ll need to retake the exam to get certified. For the attainment of the indicated score, one should factor detailed revision into their plan. This can involve referring to study guides and other ways like courses that are developed for CTFL 2018 applicants to assist them in getting ready to ace the test. Further discussion will be about the diverse study books that proved to be useful.
The ISTQB CTFL 2018 exam is for those who are newly embracing the software testing world. It covers the core aspects of the field that include the testing process, techniques, and principles, among the rest. By passing this test, individuals create a base for earning higher-level ISTQB certificates.
Free CTFL-2018 braindumps download: https://www.getvalidtest.com/CTFL-2018-exam.html
CTFL-2018 Dumps 2021 - NewISTQB Exam Questions: https://drive.google.com/open?id=1M-XqxBjeIy0uac_fwvq2pg7mIjh9J6D9