[Oct 05, 2022] EMC DES-6332 Exam Dumps Are Essential To Get Good Marks
Latest EMC DES-6332 Dumps with Test Engine and PDF (New Questions)
NEW QUESTION 70
An administrator attempts to add an S Series node to a Gen 2 VxRail cluster and the build fails What is a possible reason for this failure?
- A. Hybrid and Flash nodes cannot be mixed in the same cluster
- B. Quanta and Dell nodes cannot be mixed in the same cluster
- C. IP address pool has no more free addresses
- D. Loudmouth process needs to be restarted
Answer: A
NEW QUESTION 71
Using VxRail Manager, what information can you find under the physical health view?
- A. Clusfer ID, PSNT. Model and Temperature
- B. PSNT, Operational Status, Health State, and Memory
- C. Model, Temperature, Memory, and Health State
- D. Cluster ID. Connected Health State, and Operational Status
Answer: A
NEW QUESTION 72
A VxRail administrator is trying to run a Storage Performance Test for vSAN. However, they do not see that option in vCenter.
What could be the reason?
- A. vSphere version is 6.5.0 EP04
- B. VxRail Manager version is 4.5.101
- C. vSphere version is 6.5.0 U1
- D. VxRail Manager version is 4.5.211
Answer: B
NEW QUESTION 73
What are all the activities that can be performed from the Node Information panel of the VxRail Manager Physical back view of a VxRail E series node?
- A. Add Disks Shut down Toggle Chassis LED
- B. Replace Disks Shut down
- C. Toggle Chassis LED Add Disks Toggle Disk LEDs
- D. Replace Disks Shut down
Answer: A
NEW QUESTION 74
A VxRail administrator wants to search for VxRail related knowledge base articles through the VxRail Manager user interface Which action must the administrator perform to use this feature?
- A. Work with Dell EMC to register the VxRail appliance in the Install Database
- B. Configure proxy settings in VxRail Manager for access to the Internet
- C. Register for a VxRail Community login and set the credentials in VxRail Manager
- D. Set the Dell EMC Support username and password in VxRail Manager
Answer: B
NEW QUESTION 75
As a VxRail administrator, you must determine how long the rebuild will take after experiencing a hardware failure in the cluster. Where could you locate this information in the vSphere Web Client?
- A. Monitor > vSAN > Resyncing Components
- B. Monitor > vSAN > Physical Disks
- C. Monitor > vSAN > Virtual Objects
- D. Monitor > vSAN > Health
Answer: A
NEW QUESTION 76
An environment has two VxRail clusters with the following hardware configuration:
* Cluster-A is using FTT = 2 and FTM = Erasure Coding
* Cluster-B is using FTT = 2 and FTM = Mirroring
A 100 GB VM is planned to be vMotioned from Cluster-A to Cluster-B
How much more vSAN capacity is consumed in Cluster-B than in Cluster-A?
- A. 150 GB
- B. 100 GB
- C. 167 GB
- D. 0 GB: consumption is unchanged
Answer: B
NEW QUESTION 77
An administrator wants to locate the PSNT for a specific VxRail node in order to contact support.
Where in the vSphere Client can this information be located?
- A. Menu > Administration
- B. Menu > VxRail
- C. Hosts and Clusters > Host > Configure > Advanced System Settings
- D. Hosts and Clusters > Host > Monitor > VxRail > Physical View
Answer: D
NEW QUESTION 78
A VxRail system administrator has been tasked to add the support account to all of the 50 VxRail clusters. The administrator is using API calls but is receiving 403 error codes.
What is the likely issue?
- A. Call has failed with internal errors
- B. Support account credentials provided are not valid
- C. Username/password is not recognized
- D. User account does not have sufficient privileges
Answer: D
NEW QUESTION 79
What is a benefit when using VCF on VxRail architectures?
- A. Simplified deployment and life cycle management
- B. Optimized infrastructure performance
- C. Minimizes the risk from new deployments and operations
- D. Automation and serviceability with full stack life cycle management
Answer: A
NEW QUESTION 80
Which user interface provides remote power control (power on and power off) for VxRail E Series nodes?
- A. iDRAC
- B. VxRail Manager
- C. IPM/BMC
- D. VMware vSphere Web Client
Answer: A
NEW QUESTION 81
Which tool is used to deploy VxRail?
- A. Mobile Build Server
- B. vCenter Server
- C. vRealize Operations Manager
- D. VxRail Manager
Answer: C
NEW QUESTION 82
What is required to setup vSAN HCI Mesh?
- A. Latency of 5ms and bandwidth of 25 GB
- B. Latency of 10ms and bandwidth of 10 GB
- C. vSAN Advanced License and bandwidth of 25 GB
- D. vSAN Enterprise License and 1 GB Networking
Answer: A
NEW QUESTION 83
An administrator is trying to replace the VxRail Manager Certificate.
Where in the vSphere Client is the option located?
- A. Cluster > Configure > VxRail > Hosts
- B. Cluster > Configure > VxRail > Certificate
- C. Menu > Administration > Certificates > Certificate Management
- D. Menu > VxRail > Configuration > Certificates
Answer: C
NEW QUESTION 84
A company has bought VxRail V Series appliances with PCle network cards. How can the PCle NIC ports be configured in VxRail for data traffic?
- A. Create new Standard or DV switch and add these NICs as uplinks to carry VM network traffic
- B. During initial VxRail setup the NIC ports would be configured automatically to carry VM network traffic
- C. Create new Standard or DV switch and add these NICs as uplinks to carry both vMotion and VM network traffic
- D. During initial VxRail setup the NIC ports would be configured automatically to carry both vMotion and VM network traffic
Answer: A
NEW QUESTION 85
As an administrator, you are asked to view the health of the vSAN on the VxRail cluster. You select the VxRail cluster in the Navigation panel in vCenter Under which tab could you run the vSAN health check?
- A. Monitor
- B. vSAN
- C. Hosts
- D. Datastores
Answer: A
NEW QUESTION 86
Match each management component with its characteristic
Answer:
Explanation:
NEW QUESTION 87
Which VxRail model is a 1U form factor per node?
- A. G Series
- B. P Series
- C. S Series
- D. E Series
Answer: D
NEW QUESTION 88
......
GetValidTest just published the EMC DES-6332 exam dumps!: https://www.getvalidtest.com/DES-6332-exam.html