[Oct-2021] Get 100% Real 300-810 Exam Questions, Accurate & Verified GetValidTest Dumps in the Real Exam!
Pass Your CCNP Collaboration Exams Fast. All Top 300-810 Exam Questions Are Covered.
NEW QUESTION 41
Refer to the exhibit.
Which end-user option can resolve this issue?
- A. Standard CTI Allow Calling Number Modification
- B. Standard CTI Allow Call Monitoring
- C. Standard CTI Allow Control of Phones Supporting Rollover Mode
- D. Standard CTI Reception of SRTP Key Material
Answer: C
NEW QUESTION 42
Refer to the exhibit.
Cisco Unity Connection and Cisco Unified Communications Manager are integrated by using SCCP. The Voice Mail Ports are registered. Users report that calls fail when forwarded to voicemail. Which is a cause of the issue?
- A. The Voice Mail Pilot is not configured with a CSS that contains the INTERNAL_PT.
- B. The Voice Mail Port partition on the CSS of the phone is missing.
- C. The CSS on the Voice Mail Pilot is missing partitions for user phones.
- D. The call forward and call pickup settings do not have a CSS on Forward All.
Answer: D
NEW QUESTION 43
Refer to the exhibit.
A Jabber user is unable to access voicemail. During troubleshooting, an administrator captures this screenshot. What are the two ways to resolve this issue? (Choose two.)
- A. Make sure the Jabber service profile created in Cisco UCM contains Unity Connection UC service with a voicemail server configured.
- B. Ask an administrator to create an account for this user in Cisco Unity Connection but remove the Unity Connection UC service from the Cisco UCM Jabber service profile.
- C. Ask the user to click on the "Connect to a device" button and use the correct username and password.
- D. Ensure the user is not locally created on Cisco Unity Connection with a password expiring separately from the password that is used for Jabber.
- E. Check if "OAuth with Refresh Login Flow" is enabled on Cisco Unity Connection but disabled in Cisco UCM.
Answer: A,B
NEW QUESTION 44
Refer to the exhibit.
An engineer is troubleshooting operational performance in the network. Which action should be taken to restore high availability in this subcluster?
- A. Go to "Presence Redundancy Group Configuration" on the Cisco UCM Administration page and select the Fallback button.
- B. Go to "Presence User Assignment" on the Cisco UCM Administration page and select "rebalance users" for all users.
- C. Start all critical services on the second node, and select the Fallback button in the "Presence Redundancy Group Configuration".
- D. Start all critical services on both nodes and select "rebalance users" in the "Presence User Assignment".
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/ configAdminGuide/10_0_1/CUP0_BK_C318987B_00_config-admin-guide-imp-100/ CUP0_BK_C318987B_00_config-admin-solutions-imp-100_chapter_011010.pdf
NEW QUESTION 45
Which SAML component specifies the mapping of SAML assertion protocol message exchanges with standard messaging formats or communication protocols such as SOAP exchanges?
- A. SAML protocol
- B. SAML binding
- C. SAML assertion
- D. SAML profiles
Answer: B
NEW QUESTION 46
Digital networking is configured between two Cisco Unity Connection clusters using an HTTPS connection. Which two objects are replicated between these two clusters? (Choose two.)
- A. user templates and user greetings
- B. users and their corresponding mailboxes
- C. partitions and search spaces
- D. call handlers
- E. user greetings
Answer: B,C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/https_networking/ guide/10xcuchttpsnetx/10xcuchttpsnet010.html
NEW QUESTION 47
Refer to the exhibit.
Which statement is true?
- A. IM&P nodes in each subscluster must be configured from the same OVA template.
- B. If the IM&P node in sub-cluster-1 goes down, then users assigned to it are randomly split between the two remaining subclusters.
- C. The administrator must add one node to each subcluster for high availability.
- D. Each Cisco IM&P subcluster must have the same number of nodes.
Answer: C
NEW QUESTION 48
Refer to the exhibit.
User A tries to log in to the Cisco Jabber client, the login works fine, but the user cannot see their self-presence or other users' presence in their contact list. The administrator checks the Cisco IM and Presence Server logs and sees an issue. What is the issue, and how does it get resolved?
- A. The Cisco IM and Presence Server has CPU/memory issues; restart the IM and Presence Server.
- B. The user credentials are incorrect; ask the user to change the credentials.
- C. The user is duplicated in another Cisco IM and Presence cluster; unassign the user from the duplicate IM and Presence cluster.
- D. Presence has stopped working for the user; unassign and reassign the end-user to Cisco IM and Presence.
Answer: A
NEW QUESTION 49
A customer is using Cisco Unified IM and Presence with high availability and has reported that their primary node is not providing any IM and Presence services. What is causing this issue?
- A. The presence redundancy group node state of the primary node is 'idle".
- B. The presence redundancy group node state of the peer node is 'running in backup mode".
- C. The presence redundancy group node state of the primary node is 'initializing".
- D. The presence redundancy group node state of the peer node is "normal".
Answer: B
NEW QUESTION 50
Drag and drop the events for an on-premises Jabber SAML SSO flow from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION 51
Refer to Exhibit.
An engineer is troubleshooting operation performance in the network. Which account should be taken to restore high availability in the sub cluster?
- A. Start all critical services on the second node, and select the Fallback button in the "Presence Redundancy Group Configuration"
- B. Start all critical services on both nodes and select "rebalance users" in the "Presence User Assignment"
- C. Go to "Presence Redundancy Group Configuration" on the Cisco UCM Administration page and select the Fallback button.
- D. Go to "Presence User Agreement" on the Cisco UCM Administration page and select "rebalance users" for all users.
Answer: A
NEW QUESTION 52
A jabber user reports that they receive pop-up windows warring about untrusted certificates when they attempt to log in to jabber without receiving the certificate warnings. Which two actions resolve this issue? (Choose two.)
- A. Configure Jabber with the INVALID_CERTIFICATE_BEHAVIOR option set to "RejectAndNotify."
- B. Add the certificates to the client machine's local certificate store or keychain
- C. Reinstall the Jabber client using the /quiet option
- D. Move the user to a different Presence Redundancy Group
- E. Replace self-signed certificates with certificates signed by a CA
Answer: B,E
NEW QUESTION 53
Drag and drop the steps of the SAML SSO process from the left into the order on the right.
Answer:
Explanation:
NEW QUESTION 54
Which statement describes a role of AXL communications in the BLF Plug-in Service of the Cisco Unified Attendant Console?
- A. The AXL communications allow registered attendants to log in to Cisco Unified Communications Manager and receive calls.
- B. The AXL communications is required after installation to verify that the specified CTI manager or managers and Cisco Unified CM versions.
- C. The AXL communications enable Device Resolution Manager to resolve the device statuses of operator and system devices.
- D. The AXL communications is required after installation to verify that the specified CTI manager or managers and Cisco Unified Attendant Console versions match.
Answer: B
Explanation:
Explanation/Reference: https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/cuaca/12_0_4/design_guides/ CUACA_DG_120401.pdf
NEW QUESTION 55
Refer to the exhibit.
Users connected to the internal network report a "Cannot communicate with the server" error while trying to log in to Cisco Jabber using auto service discovery. The Jabber diagnostics and the SRV record configuration are as shown in the exhibit. The host cucm1.ccnp.cisco.com is correctly resolved by the user desktops with the Cisco Unified Communications Manager IP address. Why is the user not able to log in?
- A. SRV protocol is not set up correctly. It should be _tls instead of _tcp.
- B. The port specified on the SRV record is wrong.
- C. The domain ccnp.cisco.com does not exist on the DNS server.
- D. Marking weight as 0 on the SRV record makes it inactive, so Jabber cannot discover the Cisco Unified CM.
Answer: B
NEW QUESTION 56
When Cisco IM and Presence is configured to use automatic fallback, how long does the Server Recovery Manager service wait for a failed service/server to remain active before an automatic fallback is initiated?
- A. 10 minutes
- B. 30 minutes
- C. 1 hour
- D. 20 minutes
Answer: B
NEW QUESTION 57
Refer to the exhibit.
An administrator is troubleshooting an issue with XMPP Federation between two. eight-node IM and Presence clusters. After looking at the logs, the administrator finds this message and must publish one or more DNS SRV records containing one or more addresses of the IM and Presence node(s). How many nodes must be selected to publish?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 58
An end user opened a ticket, stating that before logging in to Jabber for Windows, a warning is displayed that a server certificate has expired. Which two certificates must be verified on the Cisco Unified Communications Manager and IM&P deployment? (Choose two.)
- A. tomcat on Cisco Unified CM
- B. capf on Cisco Unified CM
- C. callmanager on Cisco Unified CM
- D. cup on IM&P
- E. cup-xmpp on IM&P
Answer: B,E
NEW QUESTION 59
......
Penetration testers simulate 300-810 exam: https://www.getvalidtest.com/300-810-exam.html
Free Test Engine For Implementing Cisco Collaboration Applications Certification Exams: https://drive.google.com/open?id=1HIJqwnGyGv99e2T4BOMzz5LT6UK0MuOm