Pass Exam With Full Sureness - C-S4TM-2020 Dumps with 194 Questions
Verified C-S4TM-2020 dumps Q&As - 100% Pass from GetValidTest
SAP C-S4TM-2020 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION 89
Which of the following are master data elements in SAP TM? Note: There are 2 correct answers to this question.
- A. Calculation sheet
- B. Means of transport
- C. Carrier profile
- D. Calculation profile
Answer: B,C
NEW QUESTION 90
Which of the following actions can be triggered from the transportation cockpit? Note: There are 2 correct Answers to this question.
- A. Define the capacity of a truck.
- B. Remove a resource from a freight order.
- C. Create a freight settlement document.
- D. Apply a default route to a freight unit.
Answer: C,D
NEW QUESTION 91
What is the cardinality between purchasing organizations and carriers in a freight agreement RFQ master?
- A. 1 purchasing organization to 1 carrier
- B. N purchasing organizations to M carriers
- C. N purchasing organizations to 1 carrier
- D. 1 purchasing organization to N carriers
Answer: D
NEW QUESTION 92
Which documents are created in SAP Materials Management when you transfer a freight settlement document from SAP Transportation Management to SAP Materials Management when cost distribution is NOT enabled? Note: There are 2 correct Answers to this question.
- A. Purchase order
- B. Carrier invoice
- C. Service entry sheet
- D. Settlement management document
Answer: A,C
NEW QUESTION 93
What is initiated from SAP ERP as a shipper needs to perform shipping activities with the SAP TM system? Please choose the correct answer.
- A. Deliveries that are sent
- B. Order integration
- C. You can integrate SAP TM
- D. AP EWM using
Answer: B
NEW QUESTION 94
In an international outbound transportation scenario, you want to calculate base freight between a shipping point and destination transportation zones depending on gross weight. The modes of transport, road and rail, have a strong influence on the transportation costs. The price unit of the calculation rule of the rate table is set to one pallet (PAL). How many scales do you have to define in the rate table?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 95
You run the report to delete a one-time location. After the report is finished, the location is NOT deleted. What could be the reason for this?
- A. There are still messages in the incoming queue.
- B. The location is stored in the distance duration buffer table.
- C. There are still existing orders for the location.
- D. The location is part of an active integration model.
Answer: C
NEW QUESTION 96
Which of the following can be used as origin of condition?
Note: There are 2 correct answers to this question.
- A. BRFplus decision table
- B. Direct business object access
- C. Data crawler
- D. Determination class
Answer: A,B
NEW QUESTION 97
What is master data, whether it is created for a one-time purchase or as a partner with whom your organization engages continuously?
Please choose the correct answer.
- A. Managing inventory .
- B. Movements
- C. The vendor master
- D. The system integrates
Answer: C
NEW QUESTION 98
You are implementing SAP S/4HANA Supply Chain for Transportation Management. What can be direct predecessor documents for a freight order? Note: There are 2 correct answers to this question.
- A. Freight Unit
- B. Order-based Transportation Requirement
- C. Sales Order
- D. Shipment
Answer: A,C
NEW QUESTION 99
You have created a forwarding settlement document. What do you need to map to send this document from SAP TM to SAP ERP?
There are 2 correct answers to this question.
- A. SAP TM charge types to SAP ERP condition type
- B. SAP TM sales organization to SAP ERP sales organization
- C. SAP TM charge types to SAP ERP service master
- D. SAP TM purchasing organization to SAP ERP purchasing organization
Answer: A,C
NEW QUESTION 100
Validate in NWBC that the OTR has been created for the sales order by reviewing the transfer requirements. There are 3 correct answers to this question.
- A. If necessary, refresh the query.
- B. In the Original Order column, locate the number corresponding to your sales order.
- C. Drill into the document number for your sales order (click the TM OTR document number in the first column),
- D. In NWBC, choose ERP Logistics Integration -> Worklist - > Overview Transportation Requirements.
- E. Enable SAP ERP to recommend specific actions that balance profitable service and inventory
Answer: A,C,D
NEW QUESTION 101
In which of the following areas can you use incompatibilities? Note: There are 3 correct Answers to this question.
- A. Tendering
- B. Carrier selection
- C. Delivery proposal
- D. Charge calculation
- E. Freight unit building
Answer: B,D,E
NEW QUESTION 102
To which of the following can you assign a dimensional weight profile?
- A. Charge type
- B. Calculation base
- C. Charges profile
- D. Calculation profile
Answer: A
NEW QUESTION 103
When using dispute management, which activities can a carrier perform in the carrier collaboration portal? Note: there are 2 correct answers to this question.
- A. Change the quantity of a charge line's calculation base
- B. Add a detention charge
- C. Change the document currency
- D. Upload files
Answer: A,B
NEW QUESTION 104
You perform sales order scheduling for a material with enough stock on hand. Which dates on the sales order are updated by SAP TM? Note: There are 2 correct answers to this question.
- A. Loading date
- B. Transportation planning date
- C. Delivery date
- D. Material availability date
Answer: A,C
NEW QUESTION 105
For which of the following business objects is tracking and tracing provided in SAP Transportation Management? Note: There are 2 correct Answers to this question.
- A. Resource
- B. Forwarding order
- C. Freight order
- D. Service order
Answer: A,C
NEW QUESTION 106
What can you define in the forwarding order type?
There are 3 correct answers to this question
- A. Purchasing organization
- B. Stage determination
- C. Incoterm location stage building
- D. Output profile
- E. Freight unit building rule
Answer: A,D,E
NEW QUESTION 107
Which of the following can you use to create freight bookings? (2 correct answers)
- A. The freight order user interface
- B. The forwarding order user interface
- C. A report based on a default route
- D. A report based on a schedule
Answer: B,D
NEW QUESTION 108
You transfer two SAP ERP sales order for the same customer with the same delivery date to SAP TM Both sales order contains three items Based on customizing freight units are built automatically The freight unit building rule that is used contains the strategy "Consolidate as much as possible" No incompatibilities exist What is the minimum number of freight units that are created?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 109
What do you need to do when creating a custom calculation base?
- A. Define a resolution base for the calculation base
- B. Define a new charge type for the calculation base
- C. Implement a new helper class
- D. Define a scale base for the calculation base
Answer: A
NEW QUESTION 110
Which of the following can you determine using conditions in change management? Note: There are 2 correct answers to this question.
- A. Freight agreement
- B. Validity date of the rate table
- C. Carrier in the freight agreement
- D. Rate table
Answer: A,D
NEW QUESTION 111
......
C-S4TM-2020 Dumps Full Questions - Exam Study Guide: https://www.getvalidtest.com/C-S4TM-2020-exam.html
Pass C-S4TM-2020 Exam in First Attempt Guaranteed 2022 Dumps: https://drive.google.com/open?id=1gFI_iOxzSEu20_tlFynCO_kwKn02ldt4