Study HIGH Quality NS0-162 Free Study Guides and Exams Tutorials
Download Network Appliance NS0-162 Exam Dumps to Pass Exam Easily
The Network Appliance NS0-162 exam consists of 60 multiple-choice questions that must be completed within 90 minutes. The exam covers a wide range of topics, including NetApp ONTAP architecture, data protection and management, networking, and storage administration. The exam is available in English and Japanese, and the passing score is 67%.
NEW QUESTION # 42
Exhibit.
You recently added a new ESXi host to your VMware vSphere cluster. However, you cannot mount any of the existing NFS datastores to the host. Referring to the exhibit, which action solves the problem?
- A. Add HOST 3's IP address to the NFS export policy.
- B. Enable Kerberos in the export policy.
- C. Add SMB/CIFS to the access protocols.
- D. Add NFSv4 to the access protocols.
Answer: B
NEW QUESTION # 43
Exhibit.
Miss-----------------
You have an ONTAP 9.8 cluster. After network maintenance, the LIF that is shown in the exhibit is not always on a correct port and is unreachable by users until the LIFs are moved to port eOc or eOd on either storage node.
In this scenario, which action should you take to ensure that the LIF only fails over to the correct ports?
- A. Create an IPspace.
- B. Create a DNS load balancing zone.
- C. Split the broadcast domain.
- D. Change the LIFs failover policy to sfo-partner-only.
Answer: D
NEW QUESTION # 44
You have finished deploying a NetApp AFF A400 cluster.
Before you place the array into production, which two tools should be used to validate the deployment? (Choose two.)
- A. Active IQ Config Advisor
- B. Active IQ Unified Manager
- C. Active IQ Web site
- D. OnCommand Workflow Automation
Answer: B,D
NEW QUESTION # 45
An administrator has added two new hosts in an FC connected virtual environment. However, no existing datastores or LUNs are visible to these two new hosts even after a rescan.
In this scenario, which two statements are correct? (Choose two.)
- A. Verify that correct zoning is in place between the hosts and storage.
- B. Verify that FC is licensed on the ONTAP cluster.
- C. Verify that the host initiators are added to the correct igroups.
- D. Verify that the LUNs are online and created with the correct OS type.
Answer: A,C
NEW QUESTION # 46
Click the Exhibit button.
You have a 2-node cluster cabled as shown in the exhibit. You want to convert the cluster to a switched cluster.
Which two statements are true in this scenario? (Choose two.)
- A. The conversion is non-disruptive.
- B. After the conversion, traffic to the intercluster LIFs will flow through the cluster switch.
- C. The conversion is disruptive.
- D. After the conversion, traffic to the cluster LIFs will flow through the cluster switch.
Answer: A,D
NEW QUESTION # 47
Auditing has been enabled and configured on your ONTAP storage system. You have also created audit policies to monitor files and folders. Auditing has been running for over six months. You want to ensure that there have been no improper file access attempts.
How would you accomplish this task?
- A. Use Microsoft System Center to read EVTX files.
- B. Import EVTX files Into Microsoft Event Viewer.
- C. Use the Active IQ Web site to read EVTX files.
- D. Import EVTX files into Microsoft SQL.
Answer: B
NEW QUESTION # 48
What are three firewall policies? (Choose three.)
- A. cluster
- B. mgmt
- C. node
- D. data
- E. intercluster
Answer: B,D,E
NEW QUESTION # 49
Click the Exhibit button.
You are configuring a NetApp cluster to communicate on VLAN 1. However, the new LIF is unable to communicate with any host in the VLAN. The network administrator has configured the switch port as an access(untagged) port on VLAN 1 and says that the VLAN is non-routed.
Referring to the exhibit, what would you do to troubleshoot this problem?
- A. Reconfigure the LIF to be on port e0c.
- B. Verify that the network cabling is working properly.
- C. Verify that there is no IP address conflict on the network.
- D. Add a default gateway.
Answer: A
NEW QUESTION # 50
You have an ESXI cluster with VMware VMFS LUNs on an AFF A400 system. After troubleshooting performance Issues, you determine that timeout best practices are not set on the hosts.
In this scenario, which NetApp tool would apply the best practice settings?
- A. SnapManager
- B. SnapCenter Plug-in for VMware vSphere
- C. SAN Host Utilities
- D. Virtual Storage Console (VSC)
Answer: C
NEW QUESTION # 51
Exhibit.
You recently added a new ESXi host to your VMware vSphere cluster. However, you cannot mount any of the existing NFS datastores to the host. Referring to the exhibit, which action solves the problem?
- A. Enable Kerberos in the export policy.
- B. Add HOST 3's IP address to the NFS export policy.
- C. Add SMB/CIFS to the access protocols.
- D. Add NFSv4 to the access protocols.
Answer: B
NEW QUESTION # 52
Exhibit
You have a 4-node cluster.
How many ISCSI LIFs will be created from the SVM setup wizard, as shown in the exhibit?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 53
You are an administrator that manages a number of mission-critical applications that use block protocols only. The business unit requires the fastest storage failover.
In this scenario, which ONTAP solution satisfies the requirement?
- A. All SAN Array (ASA) with symmetric active-active topology
- B. ONTAP Select with Asymmetric Logical Unit Access (ALUA)
- C. AFF with Asymmetric Logical Unit Access (ALUA)
- D. FAS with symmetric active-active topology
Answer: A
NEW QUESTION # 54
Click the Exhibit button.
Referring to the exhibit, what happens to the space in the volume if the Space Reserve option is set to "Enable"?
- A. The volume shows that 100 GB has been allocated to the LUN.
- B. The LUN does not use any space from the volume since it is thin provisioned.
- C. The volume grows by 100 GB to handle the LUN size of 100 GB.
- D. The volume shrinks by 100 GB to provide the LUN 100 GB of space to use.
Answer: A
NEW QUESTION # 55
When you perform an upgrade using ONTAP System Manager 9.8, which two statements are true? (Choose two.)
- A. The Images must be manually uploaded to the cluster by using the ONTAP System Manager interface.
- B. The update history is available within the ONTAP System Manager interface.
- C. The images will be automatically uploaded to the cluster by using the ONTAP System Manager interface from the NetApp Support site.
- D. The latest available Images will appear In the ONTAP System Manager interface.
Answer: B,D
NEW QUESTION # 56
What establishes a quorum in a 4-node cluster?
- A. epsilon
- B. TieBreaker
- C. cluster peer
- D. ONTAP Mediator
Answer: A
NEW QUESTION # 57
Exhibit.
A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3.
Referring to the exhibit, what is the problem?
- A. The volume is not mounted In the namespace.
- B. The logical Interface does not allow the NFSv3 protocol.
- C. The volume is in read-only.
- D. The host IP address does not match the export policy rule.
Answer: D
NEW QUESTION # 58
You are performing an ONTAP upgrade with an intercluster data protection SnapMirror relationship in this scenario, which two steps must be performed before an NDU? (Choose two.)
- A. The destination cluster must be upgraded first.
- B. SnapMirror operations must be suspended.
- C. SnapMirror operations must be broken.
- D. The source cluster must be upgraded first.
Answer: A,B
NEW QUESTION # 59
Your company wants their newly Installed ONTAP system to automatically send telemetry data to NetApp to provide early notification of any security risks, bug fixes, and ONTAP updates. Furthermore, In case of hardware failures, a support case should be opened automatically at NetApp.
Which two NetApp components satisfy the requirements? (Choose two.)
- A. Active IQ Unified Manager
- B. Active IQ
- C. Cloud Insights
- D. ONTAP AutoSupport
Answer: B,C
NEW QUESTION # 60
You have an ESXI cluster with VMware VMFS LUNs on an AFF A400 system. After troubleshooting performance Issues, you determine that timeout best practices are not set on the hosts.
In this scenario, which NetApp tool would apply the best practice settings?
- A. SAN Host Utilities
- B. SnapManager
- C. Virtual Storage Console (VSC)
- D. SnapCenter Plug-in for VMware vSphere
Answer: C
Explanation:
Reference:
Virtual Storage Console for VMware vSphere checks and sets the ESXi host multipathing settings and HBA timeout settings that work best with NetApp storage systems.
NEW QUESTION # 61
Exhibit.
You have a NetApp AFF A400 HA pair with Fabric Pool enabled on all data using the snapshot-only policy. Users are reporting slow restores when they recover files with the Windows Previous Versions tab.
Referring to the exhibit, what is the highest latency seen on restore?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
the user retrieve files, which is a GET operation. You can use the S3 GET Object request to retrieve an object from an S3 bucket. https://docs.netapp.com/sgws-113/index.jsp?topic=%2Fcom.netapp.doc.sg-s3%2FGUID-8B7BB6D4-FA59-4E82-BEAC-45DA8C642029.html
NEW QUESTION # 62
Click the Exhibit button.
You want to add shelves to an AFF A300 HA pair that currently has six DS224C shelves already connected. You are using the onboard SAS port only, and you want to keep the multipath high availability (MPHA) configuration.
Referring to the exhibit, what is the maximum number of additional shelves allowed to be added in this configuration?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 63
You are asked by your network engineering team to make sure that your NetApp cluster Is configured to run LACP on Its network ports. Which network component satisfies this request?
- A. Interface group
- B. broadcast domain
- C. VLAN
- D. failover group
Answer: A
NEW QUESTION # 64
Exhibit.
You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit. In this scenario, which two protocols are supported? (Choose two.)
- A. NFS
- B. NVMe
- C. SMB
- D. ISCSI
Answer: A,D
NEW QUESTION # 65
You have created a new FlexCache cache volume and want to warm the cache before clients access the cache volume for the first time. In this scenario, how would you accomplish this task?
- A. Copy the data from the origin volume to the cache volume with the NetApp XCP Migration Tool.
- B. Enable block-level Invalidation using the volume flexcache origin config modify command.
- C. Prepopulate the cache volume with data from the origin volume using the flexcache prepopulate start command.
- D. Synchronize the origin and cache first with the volume flexcache sync-properties command.
Answer: A
NEW QUESTION # 66
You are planning an installation of a new stack of shelves to an HA pair and need to locate empty SAS ports...
In this scenario, which tool would you use to accomplish this task remotely?
- A. Active IQ Web site
- B. Interoperability Matrix Tool
- C. Hardware Universe
- D. ONTAP System Manager
Answer: B
NEW QUESTION # 67
......
Candidates who pass the NS0-162 exam will have a thorough understanding of NetApp ONTAP software and its features, including data protection, high availability, and storage efficiency. They will also have the skills necessary to perform essential administrative tasks such as configuring and managing NetApp storage systems, troubleshooting common issues, and implementing best practices for data management. With this certification, IT professionals can demonstrate their expertise in NetApp data management solutions, making them more marketable and valuable to employers in the industry.
Get 100% Real Free NetApp NCDA ONTAP NS0-162 Sample Questions: https://www.getvalidtest.com/NS0-162-exam.html
Accurate NS0-162 Questions with Free and Fast Updates: https://drive.google.com/open?id=1MV1ItPA0gBvRvSScoLM2H5rLtt_HTo68