2023 Latest NS0-593 DUMPS Q&As with Explanations Verified & Correct Answers
NS0-593 dumps Exam Material with 60 Questions
NEW QUESTION # 26
After users start reporting the Inability to create new flies in a CIFS share, you find EMS events for
wafl.dir.size.max logged for the volume of the SVM to which the share points.
In this scenario, which action should you take to solve this issue?
- A. Delete unneeded files from the directory.
- B. Move the volume to a different aggregate.
- C. Increase the maximum numberof files for the volume.
- D. Increase the maximum directory size for the volume.
Answer: C
NEW QUESTION # 27
You have connection Issues from a Linux host to an AFF A400 FC LUN. You are asked by support to run the
NetApp sanlun command to provide troubleshooting information.
Which NetApp software package must be installed on the host?
- A. Virtual Storage Console
- B. Inventory Collect Tool
- C. SnapDrive for UNIX
- D. Host Utilities package
Answer: D
NEW QUESTION # 28
After a motherboard replacement on a NetApp AFF A300 in a SAN environment, the customer states that
ports 0e and 0f are unable toconnect to the fabric. The ports report "offline".
What would you examine first to troubleshoot the issue?
- A. system node hardware unified-connect show command output
- B. vserver fcp wwpn-alias show command output
- C. storage port show command output
- D. vserver fcp interface show command output
Answer: C
NEW QUESTION # 29
A customer with an FC MetroClusterconfiguration that is running NetApp ONTAP 9.8 software experienced a
site outage and wants to know why the MetroClusler configuration did not switch over to the other site.
What are two reasons for this problem? (Choose two.)
- A. The site had unmirrored aggregates.
- B. An ISL link was not operating at 16Gbps.
- C. There was a failed PSU inthe switchover site.
- D. The ISLs were down between the sites.
Answer: A,C
NEW QUESTION # 30
The motherboard of Node-01 is being replaced. To perform this task, a takeover was Initiated from Node-02.
Node-02 panics showing the string below.
PANIC; Permanent errors on all HA mailbox disks (while marshalling header) in SKprocess
fnmbx_instanceWorker on release 9.5P8 (C)
What has happened in this situation?
- A. While in maintenance mode, the mailbox destroy local command was executed.
- B. While in maintenance mode, the HA_config show command was executed.
- C. While in maintenance mode, the sldiag device show command was executed.
- D. While in maintenance mode, the fcadmin device_map command was executed.
Answer: D
NEW QUESTION # 31
Your customer mentions that they have accidentally destroyed both rootaggregates in their two-node cluster.
In this scenario, what are two actions that must be performed? (Choose two.)
- A. Rejoin the second node to the re-created cluster.
- B. Install ONTAP from a USB device.
- C. Re-create the cluster from the remote backup.
- D. Re-create the cluster from the local backup.
Answer: A,B
NEW QUESTION # 32
You are troubleshooting a CIFS connection issue that is reported by some users. You decide to collect a packet
trace.
In this scenario, after you generate the packet trace, where do you find the trace file?
- A. /packet_traces of the node hosting the LIF
- B. /etc/log/packet_traces of the node hosting the LIF
- C. /etc/log/mlog/packet._traces Of all nodes
- D. /vol0/paclcet_traces of the CIFS SVM
Answer: C
NEW QUESTION # 33
Your customer noticed in NetApp Active IQ that their NetApp Cloud Volumes ONTAP forAzure HA solution
is no longer sending AutoSupport messages over HTTPS. A support ticket has been opened to find out why.
No changes have been made to the Cloud Volumes ONTAP for Azure HA environment.
In this scenario, which two autosupport command parameters should be used to validate that AutoSupport Is
working properly? {Choose two.)
- A. -to
- B. -mail-hosts
- C. -transport
- D. -proxy-url
Answer: B,D
NEW QUESTION # 34
You have a customer complaining of long build times from their NetApp ONTAP-based datastores. They
provided you packet traces from the controller and client. Analysis of these traces shows an average service
response time of 1 ms. QoS outputconfirms the same. The client traces are reporting an average of 15 ms in
the same time period.
In this situation, what would be your next step?
- A. The client that reports high latency should be investigated.
- B. The cluster interconnects should be investigated.
- C. A sync core should be triggered.
- D. The cluster is responding slowly and requires further investigation using performance archives.
Answer: A
NEW QUESTION # 35
Which two throughput elements are controlled by host applications? (Choose two.)
- A. latency
- B. concurrency
- C. Jitter
- D. operation size
Answer: A,C
NEW QUESTION # 36
A user mentions that their home drive, that Is an export within a volume, is no longer allowing them to save
files. The drive reports that it Is full, even though It shows that minimal data is written to it.
Which statement would explain this behavior?
- A. Other users wrote to this user's home drive.
- B. Other files within the volume are also owned by the user, exceeding the user quota.
- C. The client system needs to remount the export to show the proper space.
- D. The mount is stale and uses a cached version of the volume.
Answer: B
NEW QUESTION # 37
Your customer wants to access a LUN on a FAS 8300 system from a VMware ESXi server through the FC
protocol. They already created a new SVM, volume. LUN, and igroup for this purpose. The customer reports
that the server's FC HBA port Is online, but the LUN does not show up.
Referring to the exhibit, what is the reason for this problem?
- A. The esxserver igroup contains incorrect IQNs.
- B. The zoning on the FC switches Is Incorrect.
- C. The FC service has not been configured on the SVM.
- D. The LUN Is not mapped to the correct SCSI ID.
Answer: D
NEW QUESTION # 38
You ate connecting a Windows Server 2019 hostto ISCSI LUNs on a 4-node AFF A250 cluster running
NetApp ONIAP 9.8 software. The host is unable to connect to the target interface, and the ONTAP event log
has the message shown below.
ISCSI: network interface identifier disabled for use; incoming connection discarded
In this scenario, what is the cause of this connection issue?
- A. The iSCSI service is not enabled on the interface.
- B. CHAP isnot configured correctly for the specified initiator.
- C. iSNS is not enabled on the storage virtual machine.
- D. The WWPN was not added to the initiator group.
Answer: D
NEW QUESTION # 39
A customer enabled NFSv4.0on an SVM and changed the client mount from NFSv3 to NFSv4. Afterwards,
the customer found that the directory owner was changed from root to nobody.
In this scenario, which statement is true?
- A. The clients must be restarted to start using NFSv4.
- B. The export policy is not configured properly.
- C. The customer did not configure name services on the SVM.
- D. The ID mapping domains do not match between the client and server.
Answer: B
NEW QUESTION # 40
You have a customer who is concerned with high CPU and disk utilization on their SnapMirror destination
system. They are worried about high CPU and disk usage without any user operations.
In this situation, what should you tell the customer?
- A. Explain that only user workload should use the CPU and Investigate further.
- B. Suggest that the customer throttle their SnapMirror relationships to reduce resource consumption.
- C. Suggest that the customer manually cancel any scanners on the destination to reduce CPU usage.
- D. Explain that background tasks such as SnapMirror throttle up in the absence of user workload.
Answer: C
NEW QUESTION # 41
An administrator receives the following error message:
What are two causes for this error? (Choose two.)
- A. There is excessive SATA HDD load.
- B. A disk is falling.
- C. An SSD disk is performing garbage collection to create a dense data layout.
- D. There Is excessive SSD load causing the wear leveling to become unbalanced.
Answer: A,D
NEW QUESTION # 42
When you review performance data for a NetApp ONTAP cluster node, there are back-to-back (B2B) type
consistency points (CPs) found occurring onthe loot aggregate.
In this scenario, how will performance of the client operations on the data aggregates be affected?
- A. During B2B processing, clients will be unable to read data.
- B. During B2B processing, all I/O to the node is stopped.
- C. During B2B processing, clients will be unable to write data.
- D. Data aggregates will not be affected by B2B processing on another aggregate.
Answer: D
NEW QUESTION # 43
Your customer added a new DS4246 shelf to their FAS2750 single-node system and created a new aggregate
on the new shelf. Two weeks later, they log into Active IQ and discover the Medium Impact error shown
below.
Shelves with both connections via the same SAS path detected
Referring to the exhibit, which statement is correct?
- A. In a FAS2750 system, the internal shelf is only seen on one path, and the external shelves are seen on
two paths. - B. This situation is normal for a FA57750 single-node system.
- C. Active IQ Is not aware of the shelf configuration for a single-node system.
- D. The cables are cabled Incorrectly on the SAS stack.
Answer: B
NEW QUESTION # 44 
Referring to the exhibit, what do you need to do to return the MetroCluster to a normal state?
- A. Enter the storage failover giveback command on Site B.
- B. Enter the metroclustor switchback command on Site B.
- C. Enter the metrocluster switchback command on Site A.
- D. Enter the storage failover giveback command on Site A.
Answer: C
NEW QUESTION # 45
Your customer is running a NetApp AFF A800 system with NetAppONTAP 9.8 software and states that their
NS224 shelf is not showing with the correct shelf ID. You analyze the data and the shelf shows an
identification of "1.SHFHUXXXXXXXXXX."
What is the cause of the reported Issue?
- A. The shelf had a disk replaced too quickly.
- B. The shelf was cabled Incorrectly.
- C. A new shelf was added to the controller.
- D. The shelf has been power cycled.
Answer: C
NEW QUESTION # 46
After expanding a two-node AFF A300 cluster with two AFF A700 nodes, you observe latencies when data is
accessed indirectly. The system node run -node -command netstat command shows retransmits and packet
drops on the LIFs. The AFF A700 nodes with 40 Gbps and the AFF A300 connect with 10 Gbps to the cluster
interconnect. You are using Cisco Nexus 3132Q cluster interconnect switches. You just updated to ONTAP
9.8 software.
In this scenario, what is causing this problem?
- A. There is an NXOS firmware mismatch, verify in the Interoperability Matrix (1MTJ for a supportedversion.
- B. The 10 Gbps to 10 Gbps cluster Interconnect is creating a speed mismatch.
- C. AFF A300 and AFF A700 node mixing Isnot supported in ONTAP 9.8 software.
- D. The AFF A300 Is using an adapter card for the cluster Interconnect, but only onboard ports are supported.
Answer: B
NEW QUESTION # 47
A user reports that a colleague saved a file called Test.txt from a UNIX system to a multiprotocol volume.
When opening the file later from a Windows system, it was not the file that they wanted. The file that they
wanted was named TEST~1.TXT.
Which statement explains this behavior?
- A. A Snapshot copy preserved two versions of the file.
- B. UNIX name mapping updated the filename.
- C. Windows Volume Shadow Copy Service stored an older version of the file.
- D. Case Insensitivity of SMB clients caused the file to be displayed with a different name.
Answer: A
NEW QUESTION # 48
Your customer installed the shelf firmware for their NS224 shelf over a week ago, and the firmware has
notupgraded on shelf 1 module B. The customer wants to know what the next steps would be to get the
firmware upgraded after verifying that the shelf firmware is indeed loaded onto the system.
Which step would you perform to complete the firmware upgrade?
- A. Reseat the NSM100 module.
- B. Reseat the PSU of the shelf.
- C. Power cycle the shelf.
- D. Reseat the disk in Bay 0.
Answer: C
NEW QUESTION # 49
......
Share Latest NS0-593 DUMP Questions and Answers: https://www.getvalidtest.com/NS0-593-exam.html
NS0-593 Questions and Answers Guarantee you Oass the Test Easily: https://drive.google.com/open?id=1EdYzBOo6tXvcmpH0413MwKL5jJgTro-T