Cisco 350-501 Premium Exam Engine pdf - Download Free Updated 250 Questions
Verified 350-501 Bundle Real Exam Dumps PDF
NEW QUESTION 80
Refer to the exhibit:
A network administrator wants to enhance the security for SNMP for this configuration.
Which action can the network administrator implement?
- A. Re-configure to use SNMPv3.
- B. Maintain the configuration but switch to an encrypted password for device access through SSH
- C. Add a community string to the existing entry
- D. Re-configure to use SNMPv2 with MD5 authentication
Answer: A
NEW QUESTION 81
Drag and drop the functions from the left onto the Path Computation Element Protocol roles on the right.
Answer:
Explanation:
NEW QUESTION 82
ASN 65001 is peering with ASN 65002 to exchange IPv6 BGP routes. All routes that originate in ASN 65001 have a standard community value of 65001:100, and ASN 65002 is allowed to advertise only 2001
:db8:aaaa::/48. An engineer needs to update the ASN 65001 route-filtering configuration to meet these conditions:
* Looped routes into ASN 65001 and routes that have traversed 10 or more ASNs must be denied.
* Routes accepted into ASN 65001 must be assigned a community value of 65001:200.
Which configuration must the engineer apply to the ASN 65001 border router?
A)
B)
C)
D)
- A. Option C
- B. Option A
- C. Option E
- D. Option B
- E. Option D
Answer: B
NEW QUESTION 83
Drag and drop the OSPF area types from the left onto the correct statements on the right
Answer:
Explanation:
NEW QUESTION 84
Refer to the exhibit:
What does the REST API command do?
- A. It displays the information identified by Descriptions xml
- B. It removes the information identified by Descriptions xml
- C. It executes the commands specified in Descriptions xml
- D. It retrieves the information requested by Descriptions xml
Answer: C
NEW QUESTION 85
Refer to the exhibit:
Which statement supports QPPB implementation?
- A. QoS policies are identified in the MPLS forwarding table
- B. QPPB policies affect only egress traffic
- C. QoS policies rely exclusively on BGP attributes to manipulate traffic
- D. QoS policies use BGP to gain full coverage on the network.
Answer: C
NEW QUESTION 86
Refer to the exhibit.
A network operator needs to shut down interface Gi0/0/0/2 for maintenance. What occurs to the interface states of Gi0/0/0/0 and Gi0/0/0/1?
- A. Gi0/0/0/1 and Gi0//0/0 remains standby
- B. Gi0/0/0/1 and Gi0/0/0/0 become active
- C. Gi0/0/0/1 becomes active Gi0/0/0/0 remains standby
- D. Gi0/0/0/0 becomes active. Gi0/00/1 remains standby
Answer: D
NEW QUESTION 87
What causes multicast traffic to permanently stay on the shared tree and not switch to the source tree?
- A. The RP IP address is configured incorrectly.
- B. The RP announcements are being filtered.
- C. The SPT threshold is set to infinity.
- D. SSM range is being used.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/mcst_ovr.html
NEW QUESTION 88
Refer to the exhibit:
Which configuration prevents the OSPF neighbor from establishing?
- A. duplex
- B. mtu
- C. network statement
- D. default-metric
Answer: B
NEW QUESTION 89
Refer to the exhibit.
Which task completes the configuration?
- A. Specify the activate neighbor 192.168.1.2 under the IPv4 address family.
- B. Specify the source interface in the neighbor statement.
- C. Specify the maximum number of prefixes that R1 receives from neighbor 192.168.1.2.
- D. Specify the local-as value in the neighbor statement.
Answer: A
NEW QUESTION 90
Why do packet loops occur during the configuration of BlDlR-PIM?
- A. The router has not been configured to advertise itself
- B. The network does not support BIDIR-PIM
- C. No interface for carrying traffic for multicast groups has been configured
- D. The network is partially upgraded to support BIDlR-PIM
Answer: C
NEW QUESTION 91
Refer to the exhibit:
Which two statements about the ISIS topology are true? (Choose two.)
- A. R1 and R4 are Level 2 neighbors
- B. R1 and R2 are Level 2 neighbors.
- C. All four routers are operating as Level 2 routers only.
- D. All four routers are operating as Level 1-2 routers.
- E. All four routers are operating as Level 1 routers only.
Answer: B,D
NEW QUESTION 92 
Refer to the exhibit. This output is included at the end of an output that was provided by a device using NETCONF.
What does the code show?
- A. It shows the hostname of the device as rpc-reply.
- B. It shows that the running configuration is blank.
- C. It shows NETCONF uses remote procedure calls.
- D. It shows that the full configuration is being modeled by YANG.
Answer: C
Explanation:
Section: Automation and Assurance
NEW QUESTION 93
Refer to the exhibit:
Which effect of this configuration is true?
- A. The two routers fail to form a neighbor relationship because the authentication configuration is missing
- B. The two routers fail to form a neighbor relationship because their system IDs are different.
- C. The two routers fail to form a neighbor relationship because they have different ISIS area types.
- D. The two routers successfully form a neighbor relationship
Answer: D
NEW QUESTION 94
How does model-driven telemetry use YANG?
- A. to reset network devices that malfunction
- B. to subscribe to data that is streamed from a device
- C. to poll network devices on a 30-minute interval
- D. to set informs and traps on clients to report back to a centralized server
Answer: B
Explanation:
Section: Automation and Assurance
NEW QUESTION 95
Refer to the exhibit:
What is significant about the number 2 in the configuration?
- A. It represents the version of SNMP running
- B. It is the numeric name of the ACL that contains the list of SNMP managers with access to the agent
- C. It dictates the number of sessions that can be open with the SNMP manager
- D. It indicates two SNMP managers can read and write with the agent using community string cisco test
Answer: B
NEW QUESTION 96
What causes multicast traffic to permanently stay on the shared tree and not switch to the source tree?
- A. The RP IP address is configured incorrectly.
- B. The RP announcements are being filtered.
- C. The SPT threshold is set to infinity.
- D. SSM range is being used.
Answer: B
NEW QUESTION 97
Which additional feature does MPLS DiffServ tunneling support?
- A. matching EXP and DSCP values
- B. PHB layer management
- C. using GRE tunnels to hide markings
- D. interaction between MPLS and IGP
Answer: B
NEW QUESTION 98
Drag and drop the OSPF area types from the left onto the correct statements on the right
Answer:
Explanation:
NEW QUESTION 99
You are creating new Cisco MPLS TE tunnels. Which type of RSVP message does the headend router send to reserve bandwidth on the path to the tunnel's router?
- A. reservation
- B. error
- C. tear
- D. path
Answer: A
NEW QUESTION 100
Refer to the exhibit.
Router R1 is reporting that its BGP neighbor adjacency to router R2 is down, but its state is Active as shown.
Which configuration must be applied to routers R1 and R2 to fix the problem?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION 101
Refer to the exhibit:
Router 1 was experiencing a DDoS attack that was traced to interface gjgabitethernet0/1.
Which statement about this configuration is true?
- A. Router 1 drops all traffic that ingresses interface gigabitethernet0/1 that has a FIB entry that exits a different interface
- B. Router 1 accepts all traffic that ingresses and egresses interface gigabitethernet0/1
- C. Router 1 accepts source addresses that have a match in the FIB that indicates it is reachable through a real interface
- D. Router 1 accepts source addresses on interface gigabitethemet0/1 that are private addresses
Answer: C
NEW QUESTION 102
Which additional configuration is required for NetFlow to provide traceback information?
- A. LLDP must be configured or the device will be unable to locate a NetFlow analyzer.
- B. A classification ACL must be configured to identify which type of traffic will be analyzed.
- C. Cisco Express Forwarding must be configured for traffic that is egressing from the router to be properly reported.
- D. The BGP routing process must be started for any ingress or egress data to be reported when using NetFlow. Version 5.
Answer: B
Explanation:
NEW QUESTION 103
Refer to the exhibit:
When implementing an LDP protocol, an engineer experienced an issue between two directly connected routers and noticed that no LDP neighbor exists for 1.1.1.1.
Which factor should be the reason for this situation?
- A. LDP needs to be enabled on the R2 loopback interface
- B. R2 sees the wrong type of hellos from R1
- C. R2 does not see any hellos from R1
- D. LDP needs to be enabled on the R2 physical interface
Answer: C
NEW QUESTION 104
Refer to the exhibit:
Based on the show/ command output, which result m true after BGP session is established?
- A. The IOS XR router does not advertise any routes to the neighbor 192.168.2.2,but it accepts all routes from 192.168.2.2.
- B. The IOS XR router advertises and accepts all routes to and from eBGP neighbor 192.168.2.2
- C. No routes are accepted from the neighbor 192.168.2.2, nor are any routes advertised to it
- D. The IOS XR router advertises all routes to the neighbor 192.168.2.2, but it does not accept any routes from 192.168.2.2
Answer: C
NEW QUESTION 105
......
What is the duration, language, and format of Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam
- Validity: 3 years
- Duration of Exam: 120 minutes
- Language of Exam: English
- Format: Multiple choice
Pass Your Cisco Exam with 350-501 Exam Dumps: https://www.getvalidtest.com/350-501-exam.html
350-501 Dumps PDF New [2021] Ultimate Study Guide: https://drive.google.com/open?id=1grjxV3vKjjUbP83yD7R3ykGuSHOWAzP6