Cisco 350-501 Premium Exam Engine pdf - Download Free Updated 451 Questions
Verified 350-501 Bundle Real Exam Dumps PDF
Difficulty in Writing Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam
The Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies certification is one of the most important certifications that applicants can have on their CV. One of the biggest challenges for many candidates is to use the Internet to find so many details that make it impossible for them to believe, which would be beneficial for them to choose the correct materials for their tests.
The Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies test is not simpler and unless well prepared, can prove to be a very tough exam. If competent 350-501 exam dumps are researched and evaluated on 350-501 practice exams, the exam difficulty can be overcome.
However, applicants can clear the examination with the correct concentration and the correct preparatory material. GetValidTest have the most up to date 350-501 exam dumps pdf that allows a clear understanding of the pattern in questions raised by these dumping aspirants with real certification. The experts track GetValidTest for all the changes in the course. Certification problems also require realistic research, which is an ideal forum to test the knowledge that is collected. For the study content, refer to the links below.
Cisco 350-501 exam focuses on implementing and operating core technologies for service provider networks. 350-501 exam is designed for professionals who work in or aspire to work in service provider networks. 350-501 exam tests an individual’s skills in operating and implementing core technologies such as routing, configuration, and troubleshooting.
Cisco 350-501 certification exam is an excellent way for service provider professionals to demonstrate their expertise in implementing and operating complex network solutions. 350-501 exam covers a wide range of topics and is designed to test your knowledge of advanced networking concepts and your ability to work with various networking tools and technologies. If you're interested in pursuing a career in service provider networking, the Cisco 350-501 exam is an essential step in achieving that goal.
NEW QUESTION # 170
Which two routing protocols support Cisco MPLS TE Tunnels? (Choose two.)
- A. OSPF
- B. EIGRP
- C. RIP
- D. IS-IS
- E. BGP
Answer: A,D
NEW QUESTION # 171
What do Ansible and SaltStack have in common?
- A. They both can be designed with more than one master server.
- B. They both have agents running on the client machine.
- C. They both use DSL configuration language.
- D. They both use YAML configuration language.
Answer: D
Explanation:
Section: Automation and Assurance
Explanation
Explanation/Reference: https://www.edureka.co/blog/chef-vs-puppet-vs-ansible-vs-saltstack/
NEW QUESTION # 172
Drag and drop the OSs from the left onto the correct deceptions on the right.
Answer:
Explanation:
NEW QUESTION # 173
Refer to the exhibit.
Which show command shows statistics for the control plane policy and is used to troubleshoot?
- A. show policy control-plane
- B. show policy-map control-plane
- C. show control-plane
- D. show control-plane CoPP
Answer: B
Explanation:
NEW QUESTION # 174
In an MPLS VPN environment, the QoS making over the MPLS backbone must be different from the one that is received from the customer. The forwarding on the egress PE is based on the marking that is set by the ingress PE. Which null label and QoS mode can achieve this?
- A. MPLS explicit null with short pipe mode
- B. MPLS implicit null with short pipe mode
- C. MPLS implicit null with pipe mode
- D. MPLS implicit null with uniform mode
- E. MPLS explicit null with pipe mode
- F. MPLS explicit null with uniform mode
Answer: E
NEW QUESTION # 175
Refer to the exhibit:
Assume all other configurations are correct and the network is otherwise operating normally. Which conclusion can you draw about the neighbor relationship between routers R1 and R2?
- A. The neighbor relationship will be up only if the two devices have activated the correct neighbor relationships under the IPv4 address family
- B. The neighbor relationship is down because R1 believes R2 is in AS 65012.
- C. The neighbor relationship is up
- D. The neighbor relationship is down because the loco I-as value for R2 is missing in the R1 neighbor statement
Answer: B
NEW QUESTION # 176
Refer to the exhibit.
To protect in-band management access to CPE-R7, an engineer wants to allow only SSH management and provisioning traffic from management network 192.168.0.0/16. Which infrastructure ACL change must be applied to router PE-R9 to complete this task?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: C
NEW QUESTION # 177
What is an enhancement that Cisco IOS XE Software has over Cisco IOS Software?
- A. It allows all processes to use the same pool of memory.
- B. It runs on a 32-bit operating system.
- C. It is built on a GNX Neutrino Microkernel.
- D. It support symmetric multiprocessing
Answer: D
NEW QUESTION # 178
Refer to the exhibit.
R101 is peering with R102 and R103, and R201 is peering with R202 and R203 using iBGP Labeled Unicast address families. The OSPF area 0 border routers are in a full iBGP Labeled Unicast mesh, and VPNv4 routes are exchanged directly between PE routers R101 and R201 through iBGP Which address family-level configuration must be applied on ABR R102 on ABR R102 to support a Unified MPLS routing architecture with partitioned IGP domains?
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: C
NEW QUESTION # 179
Refer to the exhibit:
Which two statements about the ISIS topology are true? (Choose two.)
- A. R1 and R4 are Level 2 neighbors
- B. All four routers are operating as Level 1 routers only.
- C. All four routers are operating as Level 2 routers only.
- D. All four routers are operating as Level 1-2 routers.
- E. R1 and R2 are Level 2 neighbors.
Answer: D,E
NEW QUESTION # 180
Drag and drop the descriptions from the left onto the corresponding OS types on the right.
Answer:
Explanation:
NEW QUESTION # 181
A network engineer is configuring RIP as the routing protocol between multiple PEs and CEs. The engineer must avoid advertising the same routes back to their sources. Which action should be performed on the routers to accomplish this task?
- A. Enable bidirectional forwarding detection on each device.
- B. Define VRFs on each device to separate the traffic.
- C. Define the site of origin on each interface.
- D. Configure a different route distinguisher for each prefix.
Answer: C
Explanation:
Although the SoO is set on BGP address family configuration mode not interface mode, but it is applied to the interface based on this reference. "The configuration of the SoO extended community allows MPLS VPN traffic to be filtered on a per-site basis. The SoO extended community is configured in an inbound BGP route map on the PE router and is applied to the interface." https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/16-12/configuration_guide/mpls/b_1612_mpls_3850_cg/configuring_eigrp___mpls_vpn_pe_ce_site_of_origin.pdf
NEW QUESTION # 182
Refer To the exhibit:
On R1, which output does the show isis neighbors command generate?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: B
NEW QUESTION # 183
Drag and drop the functions from the left onto the Path Computation Element Protocol roles on the right.
Answer:
Explanation:
Explanation
PCE - 1,2,5
PCC- 3,4
NEW QUESTION # 184
Refer to the exhibit.
Router 1 is missing the route for the router 2 loopback 0. What should the engineer change to fix the problem?
- A. the hello timers on Router 1 and Router 2 to be different
- B. the wildcard mask network statement in OSPF of Router 2
- C. the area numbers on Router 1 and Router 2 to be similar
- D. Router 1 to be an ABR
Answer: C
NEW QUESTION # 185
Refer to the exhibit. Users in AS 65010 are connected with the application server in AS 65050 with these requirements:
- AS 65010 users are experiencing latency and congestion to connect
with application server 172.16.50.10.
- AS 65030 must be restricted to become Transient Autonomous System for traffic flow.
- Links connected to AS 65020 and AS 65040 are underutilized and must
be used efficiently for traffic.
Which two configurations must be implemented to meet these requirements? (Choose two.)
- A. Apply the AS-Path route-map policy for traffic received from R3.
- B. Configure a higher Local preference for R5-R4 BGP peering.
- C. Configure the route map to set the MED 50 attribute for R5-R4 BGP peering.
- D. Configure the route map to prepend the AS-Path attribute for R5-R3 BGP peering.
- E. Apply the MED route-map policy for traffic received from R4.
Answer: C,D
NEW QUESTION # 186
An network engineer is deploying VRF on ASBR router R1. The interface must have connectivity over an MPLS VPN inter-AS Option AB network. Which configuration must the engineer apply on the router to accomplish this task?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: B
NEW QUESTION # 187
Refer to the exhibit.
Refer to the exhibit. A client wants to filter routes to a BGP peer to limit access to restricted areas within the network. The engineer configures the route map ciscotest to filter routes from the BGP neighbor. The engineer also sets a tag that will be used for QoS in the future. Which task must be performed to complete the Implementation?
- A. Attach the new route map to the BGP neighbor statement in the inbound direction.
- B. Create a route map, configure BGP with an IPv4 address family, and activate the neighbor.
- C. Add a route map statement with sequence 40 that links a BGP community to the routing protocol
- D. Create a policy map named ciscotest and apply It to inbound traffic on the link that is directly connected to the BGP neighbor.
Answer: A
NEW QUESTION # 188
Drag and Drop Question
Refer to the exhibit. An engineer wants to determine which paths are best, second best, third best, and fourth best. Drag and drop the peer addresses on the left to the corresponding BGP best-path selection order on the right.
Answer:
Explanation:
NEW QUESTION # 189
Refer to the exhibit.
AN engineer is configuring segment routing on an ISP to simplify traffic engineering and management across network domains. What should the engineer do to complete the implementation of segment routing?
- A. The segment will run without any further configuration.
- B. Area authentication must be enable before segment routing will run.
- C. OSPF must be configured with wide area metrics to support routing.
- D. Area Authentication must be enable before segment routing will run.
Answer: B
NEW QUESTION # 190
Refer to the exhibit:
This configuration is being applied on an IOS XR router.
Which statement about this configuration is true?
- A. It is used to create a sensor-group and has a list of YANG models for streaming
- B. It is used to identify MIB entries and has a list of YANG models
- C. It is used to identify traps for SNMP polling
- D. It is used to create a subscription to specify the streaming interval
Answer: A
NEW QUESTION # 191
Which configuration modifies Local Packet Transport Services hardware policies?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r4-1/addr_serv/command/reference/b_ipaddr_cr41crs/b_ipaddr_cr41crs_chapter_0111.html#wp1754734006
NEW QUESTION # 192
......
Pass Your Cisco Exam with 350-501 Exam Dumps: https://www.getvalidtest.com/350-501-exam.html
350-501 Dumps PDF New [2024] Ultimate Study Guide: https://drive.google.com/open?id=1CdcdeLM9JfDSb5RaYe4EPTxj3l1TZmjk