Most UptoDate F5 301a Exam Dumps PDF 2022
100% Free LTM Specialist 301a Dumps PDF Demo Cert Guide Cover
Certification Path of F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam
The second test is F5 301a. Candidates who complete the course successfully will be F5 Certified! BIG IP status, Administrator. This test would assist the student in comprehending how a packet is handled after it arrives at the computer (connection table, packet filters, etc.). Learn how a virtual server responds to an order. Isolate where the problem may be based on the processing order if you have a complex connection question. Determine a virtual server’s current condition. Check to see whether a virtual server is listening on the correct port. Check to see whether a virtual machine is installed with the correct IP address. Check to see whether the virtual server is set up with the right profiles.
Specialist, F5 BIG-IP Local Traffic Manager (LTM): Maintain & Troubleshoot The F5 Certified Technology Specialists Certification is linked to the 301a Exam. This 301a Exam verifies the abilities to plan, execute, manage, and troubleshoot advanced F5 product functionality in order to improve the effectiveness of an Application Delivery Network. This 301a exam also assesses candidates' abilities to apply their knowledge of underlying concepts, such as SSL-based VPN deployment and symmetric or asymmetric acceleration, to incorporate Local Traffic Manager into current networks as well as new implementations. The terms “network administrator” and “network engineer” are interchangeable. Typically, you should expect the same work positions after completing this degree whether you retain or seek it.
NEW QUESTION 12
The web application team requests help from the LTM Specialist to Improve the performance of their web sites that are load balanced by the F5 LTM device with a Standard Virtual Server.
Which virtual server type will improve the performance of the web application servers?
- A. Performance (Layer 4)
- B. Stateless
- C. Forwarding (IP)
- D. Performance (HTTP)
Answer: D
NEW QUESTION 13
An LTM Specialist needs to configure a setup for antivirus scanning of HTTP traffic with an internet Contact adaption Protocol (ICAP) server.
Which two server type should be used? (Choose two.)
- A. Standard
- B. Stateless
- C. Forwarding IP
- D. Performance HTTP
- E. Internal
Answer: A,E
NEW QUESTION 14
Exhibit.
Webserver_pool consists of 6 members. phpAuction_80_pool consists of 2 members LTM1 is the current Active member.
LTM1 loses connectivity to 3 of the 6 members in the webserver_pool LTM2 still has connectivity to all servers.
What is the expected failover behavior?
- A. LTM1 Standby / LTM2 Standby
- B. LTM1 Active /LTM2 Active
- C. LTM1 Standby / LTM2 Active
- D. LTM1 Active / LTM2 Standby
Answer: D
NEW QUESTION 15
A web application is configured as follows:
What should be modified to set a maximum request limit?
- A. Pool settings
- B. Virtual server settings
- C. ICP Profile
- D. HTTP profile
Answer: D
NEW QUESTION 16
An LTM Specialist needs to use the tmsh command to create a pool named http_pool with member
10.10.101:80 on an LTM device.
Which expression should the LTM Specialist use?
- A. # tmsh create it pool http_pool members {10.10.10.101:80}
- B. # tmsh create pool http_pool members {10.10.10.101:80}
- C. # tmsh create pool http_pool members add {10.10.10.101:80}
- D. # tmsh create itm pool http_pool member {10.10.10.101:80}
Answer: A
Explanation:
The option should be wrong, it should ne itm instead of it, the correct command is:tmsh create itm pool http_pool members add (10.10.10.101:80}
NEW QUESTION 17
An LTM Specialist needs to use a set of addresses to access an Internet website in an outbound configuration.
Which feature should the LTM Specialist configure?
- A. NAT address
- B. SNAT address
- C. NAT pool
- D. SNAT pool
Answer: D
NEW QUESTION 18
In an iApp, which configuration protects against accidental changes to an application Services configuration?
- A. Template
- B. Components
- C. Name
- D. Strict Updates
Answer: D
NEW QUESTION 19
An LTM Specialist needs to deploy a virtual server that will load balance traffic targeting https://register.example.com to a set of three web servers. Persistence needs to be ensured. No persistence mirroring is allowed SSL offloading is required.
A fourth web server with fewer resources will be used to handle requests from engine bots to https://register.example.comvrobots.txt by an iRule. The (Rule will use the HTTP_REQUEST event. .
What are the required profile and persistence settings to implement this
- A. tcp, clientssl, http, serverssl cookie persistence
- B. tcp. dientssl, hup, source address persistence
- C. tcp, clientssl, http. cookie persistence
- D. tcp, clientssl, serverssl, ssl persistence
Answer: C
Explanation:
The option is wrong, it should be clientssl and serverssl. If the title requires ssl offload instead of encryption, you need clientssl instead of serverssl. irule needs HTTP profile to enable HTTP_REQUEST. If the session cannot be mirrored, the cookie session remains to meet the demand.
NEW QUESTION 20
An LTM Specialist has trouble with SNMP traps in the management network The ITM Specialist takes the network capture shown to troubleshoot:
What should the UM Specialist change to capture packets related to this workflow?
- A. the port
- B. the verbose level
- C. the interface
- D. the tcpdump filter expression
Answer: C
NEW QUESTION 21
An LTM Specialist needs to enable TCP connection re-use for a non-HTTP application. The application uses a simple request response protocol where each request and response is contained within a single packet.
Which configuration option should the LTM Specialist adjust?
- A. increase the connection limit for pool members
- B. assign a OneConnect profile
- C. use a Performance (Layer 4) Virtual Server
- D. increase the idle Timeout in a custom TCP profile
Answer: B
NEW QUESTION 22
A web developer needs a virtual server configured for an application.
The application details are as follows:
Application is accessed on port 443.
The application traffic is encrypted by the server.
HTTP is not being used. No data manipulation is necessary.
Throughput is critical.
NO connections are terminated on the LTM.
Which configuration provides the best performance?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: A
NEW QUESTION 23
An LTM Specialist must create a new virtual server for HTTP access. The LTM Specialist creates a forwarding virtual server to reach the resource.
What is a potential result of this action?
- A. Packet filter allowances are also required
- B. HTTP traffic is NOT allowed
- C. Other service ports could be allowed
- D. IP conflict result
Answer: B
NEW QUESTION 24
set payload {CACHE :: payload}
}
Which two profiles should be used on the virtual server? (Choose two.)
- A. http
- B. http-transparent
- C. http compression
- D. stream
- E. webacceleration
Answer: A,E
NEW QUESTION 25
AN LTM Specialist needs to determine the delay between an LTM device and the internal web server for a specific client.
Which two AVR reporting options should the LTM Specialist enable to measure the delay? (Choose two.)
- A. Server latency
- B. Methods
- C. User agents
- D. Client IP
The problem is to specify the server delay of the client - E. Response codes
Answer: A,D
NEW QUESTION 26
A company plans to launch a huge marketing campaign and expects increase demand of their secure website. With the current virtual server setup, the LTM Specialist expects that the LTM device will reach its capacity limits. For the wen application to function properly. Cookies persistence is required. The LTM Specialist needs to reduce LTM device load without breaking the application.
Which two settings should the LTM Specialist modify to meet the requirement? (Choose two.)
- A. Remove web acceleration profile.
- B. Remove HTTP profile
- C. Remove ClientSSL profile
- D. Modify virtual Server type to performance (Layer 4)
- E. Remove HTTP compression profile
Answer: A,E
Explanation:
It is required that cookie persist must be used and http profile must be used, and SSL offloading must also be required. It must be in standard mode, excluding BD E.
NEW QUESTION 27
An LTM device receives a response string containing "error"
Which monitor type and parameter will mark the HTTP server as down?
- A. HTTP monitor and Receive Disable String "error'' .... flag is disable
- B. HTTP monitor. Receive String "down", and set the Reverse option to Yes .... flag is
- C. HTTP monitor, Receive String "error", and set the Reverse option to Yes
- D. HTTP monitor and Receive String "error'' ... flag is up
Answer: C
NEW QUESTION 28
A web server is being overloaded with HTTPS traffic. To decrease the load on the server, the LTM Specialist and the Server. Administrator decide to perform SSL offloading on the LTM device. The configuration of the virtual server is as follows:
Which change must be made to the configuration to perform SSL offloading?
- A. Remove the severssl profile
- B. Remove the clients profile
- C. Remove the clientssl and serverssl profiles
- D. Remove the clientssl and http profiles
Answer: A
NEW QUESTION 29
Where does a LTM Specialist view all of the objects that are part of a deployed iApp?
- A. Local Traffic . Virtual Servers > Applications
- B. IAP > Application Service > Components
- C. iAPP> Application Policy > Objects
- D. Local Traffic > Network Map > View Map
Answer: B
NEW QUESTION 30
When importing a PEM formatted SSL certificate, which text needs to appear first in the file?
- A. --START CERTIFICATE....
- B. ...SECURITY CERTIFICATE....
- C. ...BEGIN CERTIFICATE....
- D. ...SSL CERTIFICATE....
Answer: C
NEW QUESTION 31
A design requires the LTM device to become HA standby when the one of the two physical interface on the External trunk is down the External trunk is an interface on the External VLAN Which TMOS command enables this behavior?
- A. tmsh create sys ha-group External trunks add External threshold 2 weight 101)
- B. tmsh modify net van External failsafe enabled
- C. tmsh create sys ha-group External trunks add Externally
- D. tmsh create sys ha-group External trunks add ( External( attribute percent up-members 100))
Answer: A
NEW QUESTION 32
An LTM Specialist is configuring a client profile to offload processing a new application Company policy requires that clients can resume session for up to 30 minutes, but must renegotiate a new session after that.
Which setting should the LTM Specialist change to satisfy this requirement?
- A. Renegotiation period
- B. Renegotiate Max Record Delay
- C. Cache timeout
- D. Cache size
Answer: C
Explanation:
Question stem requires that you can resume SSL session within 30 minutes, then you need to define the ssl cache time in 30 minutes
NEW QUESTION 33
What should an LTM Specialist configure on an LTM device to send AVR notification emails?
- A. Email notification to be sent via iControl from the LTM device
- B. Syslog on the LTM device to send to an SMTP server
- C. Custom SNMP traps on the LTM device for AVR notifications
- D. Email notification to be sent via SMTP from the LTM device
Answer: D
NEW QUESTION 34
......
How to Prepare For F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam
Preparation Guide for F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam
Introduction
An F5 Certified BIG-IP Administrator can handle application delivery networks (ADNs) and F5 Traffic Management Operating System (TMOS) devices, as well as conduct routine management and troubleshooting. The F5-CA qualification requires passing two exams:
- Exam 101-Fundamentals of Application Delivery
- Exam 301a-TMOS Administration
Pre-existing BIG-IP implementations and provisional fault isolation are managed by an F5 Certified BIG-IP Administrator. They must be able to edit BIG-IP artefacts and make appropriate configuration adjustments. They’re still in charge of application delivery networks (ADNs) and managing and troubleshooting F5 Traffic Management Operating System (TMOS) devices on a regular basis. These Certified Experts manage BIG-IP infrastructure such as virtual servers, pools, pool owners, nodes, accounts, and displays using TMSH and a setup utility. They also maintain BIG-IP repositories and build, rebuild, and manage them. Certified BIG-IP Administrators must therefore review the state, functionality, and statistics of a resource in order to consider how BIG-IP networks are actually handling traffic.
The function of BIG-IP systems as a proxy mechanism inside an ADN is defined by administrators. BIG-IP devices are set up, licensed, and provisioned by them. Profiles are used by a Certified BIG-IP Administrator to monitor how BIG-IP networks handle traffic across virtual servers. They’re also in need of utilizing different medical methods to troubleshoot and diagnose issues. After it has been mounted, configured, and applied, passing this exam demonstrates independence in conducting day-to-day operations and simple troubleshooting of TMOS-based systems in different application environments. Individuals may opt to finish their credential path here or go on to the Technical Professional, Technical Specialist, Cloud, or Security Solutions tracks. In this guide we will cover all the aspects of F5-301a dumps and F5-301a practice exams.
Updated F5 301a Dumps – PDF & Online Engine: https://www.getvalidtest.com/301a-exam.html
PDF Exam Material 2022 Realistic 301a Dumps Questions: https://drive.google.com/open?id=1_WKsdHsIzTLMY6-lLXkKvublLYpFVr7N