[Nov-2021] F5 301a Exam: Basic Questions With Answers
New 2021 Realistic Free F5 301a Exam Dump Questions & Answer
For more info read reference:
F5-301a Official Certification Site
Who should take the F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam
People who choose to receive an F5 Professional Certification, which certifies their abilities to manipulate the whole device stack, from standard network experience to specialized application-layer awareness, and the ability to combine the two realms. Candidates should be familiar with network fundamentals, protocols, and general traffic control principles. The student should also be familiar with the basics of F5 technologies as they pertain to network fundamentals, protocols, and traffic control. GetValidTest provides applicants with validated questions and correct responses that would be asked throughout their final test. As a result, candidates are more likely to achieve high scores on the final test, and one of the best things is that we even have F5 301a dumps in PDF format, which candidates can import and review offline.
The following knowledge/abilities are required of candidates:
- Describe the Open Systems Interconnection (OSI) model’s seven layers.
- Recognize and identify the TMOS elements (F5 Traffic Management Operating System).
- Describe HTTP’s legitimate uses and processes.
- Describe the benefits of using a complete device proxy.
The F5 BIG-IP Local Traffic Manager (LTM) Specialist: Maintain & Troubleshoot 301a Exam certification is a globally recognized credential that certifies individuals as F5 Certified Technology Specialists. If an applicant wishes to advance in their profession, they must develop their experience, qualifications, and abilities. This specialized expertise and ability is shown by the F5 BIG-IP Local Traffic Manager (LTM) Specialist: Maintain & Troubleshoot 301a Exam qualification. If an applicant has passed the F5 LTM Specialist: Architect, Setup, and Deploy 301a Exam and has knowledge of the related technology and skills needed to pass the F5 BIG-IP Local Traffic Manager (LTM) Specialist: Maintain & Troubleshoot 301a Exam, he can take this exam.
NEW QUESTION 11
An LTM Specialist needs to use the tmsh command to create a pool named http_pool with member
10.10.101:80 on an LTM device.
Which expression should the LTM Specialist use?
- A. # tmsh create it pool http_pool members {10.10.10.101:80}
- B. # tmsh create pool http_pool members {10.10.10.101:80}
- C. # tmsh create pool http_pool members add {10.10.10.101:80}
- D. # tmsh create itm pool http_pool member {10.10.10.101:80}
Answer: A
Explanation:
The option should be wrong, it should ne itm instead of it, the correct command is:tmsh create itm pool http_pool members add (10.10.10.101:80}
NEW QUESTION 12
To improve application security, an LTM Specialist must configure a BIG application access. The BIG IP system to authenticate the client certificate before permitting application access. The BIG-IP system must also support the ability to red to redirect users to a certificate enrolment system without generating a browser error.
Within the Client SSL profile, which value should the LTM Specialist select for the Client Certificate option?
- A. Require
- B. Demand
- C. Request
- D. ignore
Answer: A
NEW QUESTION 13
TWO LTM devices are in the same Device Group and configured for Ac live/Standby Failover. The LTM Specialist observes that the HA Active and Standby device constantly changes state. All network links use the default route domain A dedicated fiber ink is used for the HA connection with a latency of 250 ms but no packet loss.
What is causing the change in failover state to occur?
- A. The HA network is using the default routing domain.
- B. The HA network latency is too high.
- C. The HA network is using multicast IP.
- D. The HA network is not configured for mirroring.
Answer: C
Explanation:
NEW QUESTION 14
An LTM device an application that requires all connections to be secured via SSL The device must verify that request contain a specific cookie before allowing the request to be sent to the pool member.
Which virtual server type should an LTM Specialist configure on the LTM device?
- A. Standard
- B. Performance (Layer 4)
- C. Stateless
- D. Forwarding (IP)
- E. Performance (HTTP)
Answer: A
NEW QUESTION 15
An ITM Specialist has the configuration shown:
The LTM Specialist needs to create a new virtual server in part B.
Which virtual address(es) should be used for the new virtual server?
- A. 10.100.0.1 and.10.120.0.1
- B. 10.90.0.1 and 10.100.0.1
- C. 10.90.0.1 and 10.12.0.1
- D. 10.120.0.1 only
Answer: A
NEW QUESTION 16
An LTM Specialist must reconfigure a BIG-IP system that load balances traffic to a web application. The security department has informed the LTM Specialist that the following cipher string must be used for TLS connections from BIG-IP to the web application.
NATIVE:IMDS:EXPORT:IDHE:EDH@SPEED
In which virtual server profile should the cipher string be configured?
- A. Rewrite profile
- B. Server SSL
CB. Client SSL - C. SPDY profile
Answer: B
Explanation:
Require SSL and flow F5 to server, server ssl
NEW QUESTION 17
An LTM device is configure with the wildcard virtual servers displayed below.
A client connection is made to 172.24.31.14:443.
- A. VS_172_24_WILDCARD
- B. VS_HTTP_WILDCARD
- C. VS_HTTPS_WILDCARD
- D. VS_172_24_1_WILDCARD
Answer: A
Explanation:
Match the network segment first and then port.
NEW QUESTION 18
An application is sensitive to packet loss and unexpected session termination. A pair of LTM devices is configured in an Active/Standby high availability configuration. SNATS are NOT used and the virtual server contains a Universal Persistence profile.
which two actions must an LTM Specialist take to ensure the sessions are maintained between the client and server during an LTM device failover event while maintaining maximum uptime? (Choose two.)
- A. enable Clone Pools for a virtual server and a persistence profile
- B. configure a serial failover cable for mirror traffic
- C. configure a OneConnect profile to mirror connections
- D. configure a VLAN and primary mirroring address for mirror traffic
- E. enable Mirroring for a virtual server and persistence profile
Answer: D,E
NEW QUESTION 19
A design requires the LTM device to become HA standby when the one of the two physical interface on the External trunk is down the External trunk is an interface on the External VLAN Which TMOS command enables this behavior?
- A. tmsh create sys ha-group External trunks add External threshold 2 weight 101)
- B. tmsh modify net van External failsafe enabled
- C. tmsh create sys ha-group External trunks add Externally
- D. tmsh create sys ha-group External trunks add ( External( attribute percent up-members 100))
Answer: A
NEW QUESTION 20
Refer to the exhibit.
An LTM Specialist configures the two syslog destination Syslog destination #1 can receive messages but the syslog destination #2 can NOT receive messages.
Which command sill correct the issue?
- A. {/Common)(tmos) # modify Ays syslog remote servers modify {syslog_dest2 {local- ip 10.208.102 254)}
- B. {Common(tmos) # modify/syslog remote-servers modify {syslog_dest2 {lost.10.10.10.28 }}
- C. {/Common) (tmos) # modify /sys syslog remote-servers modify {syslog_dest2 {host 10 208.102.254 }}
- D. {/Common)(tmos) # modify /syssyslog remote-servers modify (syslog_dest2 {local-ip
Answer: D
NEW QUESTION 21
Traffic to a pool of SFTP servers that share storage must be balanced by an LTM device.
What are the required profile and persistence settings for a standard virtual server?
- A. tcp - no persistence profile will be used
- B. tcp, clientssl, serverssl persistence
- C. tcp, ctientsst, ftp serverssl persistence
- D. tcp, ftp - Source address persistence
Answer: D
NEW QUESTION 22
A virtual server is using a TCP profile based on the top-wan-optimized profile for a streaming application Users report videos are loading slowly.
Which setting should be modified in the TCP profile to optimize the application?
- A. Disable Reset on Timeout
- B. Disable Nagle's Algorithm
- C. Disable Slow Start
- D. Disable Selective ACKs
Answer: C
NEW QUESTION 23
A web developer needs a virtual server configured for an application.
The application details are as follows:
Application is accessed on port 443.
The application traffic is encrypted by the server.
HTTP is not being used. No data manipulation is necessary.
Throughput is critical.
NO connections are terminated on the LTM.
Which configuration provides the best performance?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: A
NEW QUESTION 24
A virtual server with SNAT automap enabled selects pool member 10.20.0.10.443 for the server-side flow. The client side flow source IP is 192.168.0.10 .
Which source IP should be expected in the server-side connection?
- A. 10.20.0.2
- B. 10.20.0.1
- C. 192.168.0.10
- D. 10.50.0.2
Answer: A
NEW QUESTION 25
An LTM Specialist needs to enable TCP connection re-use for a non-HTTP application. The application uses a simple request response protocol where each request and response is contained within a single packet.
Which configuration option should the LTM Specialist adjust?
- A. increase the connection limit for pool members
- B. assign a OneConnect profile
- C. use a Performance (Layer 4) Virtual Server
- D. increase the idle Timeout in a custom TCP profile
Answer: B
NEW QUESTION 26
An LTM Specialist to configure a backend server to be disabled it takes longer than 30 seconds to respond to a request.
Which values should the LTM Specialist enter for interval and timeout?
- A. Interval 10, timeout 30
- B. Interval 10, timeout 31
- C. Interval 30, timeout 30
- D. Interval 30, timeout 91
The official recommendation is that timeout 3 times the interval value +1.
Answer: B
NEW QUESTION 27
A VCMP guest has the following characteristics:
* Resources allocated for CPU memory, network interfaces, and disk space
* Virtual disk created
* The guest is NOT running
The guest is NOT running in which state is the VCMP guest
- A. Provisioned
- B. Offline
- C. Deployed
- D. Configured
Answer: A
NEW QUESTION 28
An LTM Specialist is configuring a virtual server with an IP address.
Which configuration is unsupported?
- A. Performance 14 virtual server with a FastHTTP profile
- B. Standard virtual server with a TCP profile
- C. Standard virtual server with an HTTP profile
- D. Performance 14 virtual server with an HTTP profile
Answer: D
NEW QUESTION 29
A virtual server configuration for traffic destined to a server is as shown:
HTTP traffic is destined to the 10 10.20.1 server from the source
Based on precedence, which virtual server accepts this traffic?
- A. MyvS1
- B. MyVS3
- C. MyVS2
- D. MyVS4
Answer: C
NEW QUESTION 30
While working with a web developer, it is determined that additional logic is required to assess the pool member availability.
Which two monitor types should be used in this scenario? (Choose two)
- A. Gateway ICMP
- B. TCP Echo
- C. Scripted
- D. TCP
- E. External
Answer: C,E
NEW QUESTION 31
An TLM Specialist has an Exchange that must use the LTM device to route traffic to the internet.
Which SNAT/NAT configure allows the Exchange server's traffic access the internet through the LTM device?
- A. SNAT List
- B. SNAT Pool
- C. NAT
- D. SNAT Automap
Answer: A
NEW QUESTION 32
An LTM Specialist discovers an issue with the custom http monitor that returns in a false positive status.
The end users cannot get the right website, but the http monitor marks the pool member UP.
What is causing the false positive result?
- A. The end user should use another type of browser.
- B. The response is compressed.
- C. The Content-Type has value "iso-8859-200".
- D. The response is chunked.
Answer: C
NEW QUESTION 33
Exhibit.
- The ITM devices LTM 1 and LTM2 are configured in Device Group X (Sync-Failover)
- LTM3 and LTM4 are configured in Device Group Y (Sync-Only)
- An LTM specialist configures Device Group Z (Sync-Only) to keep several profiles in (sync-Only) to keep several profiles in sync across all devices.
- Device GROUP X has four Traffic Groups A, B, C and D configured.
- Device Group Y has four Traffic Groups E, F, G, and H configured
- Auto Fallback IS NOT Enabled.
- Each Device group is healthy and able to pass traffic for any traffic group assigned to that Device Group.
The data center that contains LTM2 and LTM4 loses power. After 10 minutes; power is restored and all devices are up and healthy.
What is the state of each Traffic Group on each ITM device after power is restored?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
NEW QUESTION 34
A company plans to launch a huge marketing campaign and expects increase demand of their secure website. With the current virtual server setup, the LTM Specialist expects that the LTM device will reach its capacity limits. For the wen application to function properly. Cookies persistence is required. The LTM Specialist needs to reduce LTM device load without breaking the application.
Which two settings should the LTM Specialist modify to meet the requirement? (Choose two.)
- A. Remove web acceleration profile.
- B. Remove HTTP profile
- C. Remove ClientSSL profile
- D. Modify virtual Server type to performance (Layer 4)
- E. Remove HTTP compression profile
Answer: A,E
Explanation:
It is required that cookie persist must be used and http profile must be used, and SSL offloading must also be required. It must be in standard mode, excluding BD E.
NEW QUESTION 35
......
Guaranteed Success in LTM Specialist 301a Exam Dumps: https://www.getvalidtest.com/301a-exam.html
301a Practice Test Engine: Try These 150 Exam Questions: https://drive.google.com/open?id=19JJ_UNU8wJo-HV-CjWh3aaU5eHYu2br0