Best Cisco 300-710 2024 Training With 279 QA's
Cisco 300-710 Certification Exam Questions
To pass the Cisco 300-710 exam, candidates need to have a solid understanding of network security concepts and experience in configuring and troubleshooting Cisco Firepower appliances. 300-710 exam consists of 60-70 multiple-choice questions and has a time limit of 90 minutes. The passing score for the exam is 750 out of 1000.
Cisco 300-710 certification exam is an excellent opportunity for network security professionals seeking to specialize in securing networks with Cisco Firepower. Securing Networks with Cisco Firepower certification validates the skills and knowledge required to deploy, configure, and manage Cisco Firepower technologies, including intrusion prevention, URL filtering, and network-based malware protection. The CCNP Security certification is recognized globally and is highly valued by employers seeking to hire experienced network security professionals.
Topics of Securing Networks with Cisco Firepower (300-710 SNCF) Exam
These core topics isted below are general recommendations for the material that is likely to be used for the examination. However, on any particular delivery of the test, other similar topics could also appear. The guidelines below can update at any time without notice to better represent the contents of the exam and for clarity purposes.
It is recommended that, where possible, the applicant use these courses and/or other resources to provide background information on the exam objectives. The syllabus for the Securing Networks with Cisco Firepower (300-710 SNCF) examination is listed below in detail of each section and their topics:
1. Deployment (30%)
Objectives covered by this section:
Objective 1.1 - Implement NGFW modes:
- Routed mode
- Transparent mode
Objective 1.2 - Implement NGIPS modes:
- Passive
- Inline
Objective 1.3 - Implement high availability options:
- Active/standby failover
- Multi-instance
- Link redundancy
Objective 1.4 - Describe IRB configurations
2. Configuration (30%)
Objectives covered by this section:
Objective 2.1 - Configure system settings in Cisco Firepower Management Center
Objective 2.2 - Configure these policies in Cisco Firepower Management Center:
- Access control
- Intrusion
- SSL
Objective 2.3 - Configure these features using Cisco Firepower Management Center:
- Application detectors (Open AppID)
- Correlation
- Network discovery
- Actions
Objective 2.4 - Configure objects using Firepower Management Center:
- Object Management
- Intrusion Rules
Objective 2.5 - Configure devices using Firepower Management Center:
- QoS
- Certificates
- Device Management
- NAT
3. Management and Troubleshooting (25%)
Objectives covered by this section:
Objective 3.3 - Troubleshoot using packet capture procedures
Objective 3.4 - Analyze risk and standard reports
Objective 3.1 - Troubleshoot with FMC CLI and GUI
Objective 3.2 - Configure dashboards and reporting in FMC
4. Integration (15%)
Objectives covered by this section:
Objective 4.2 - Configure Cisco AMP for Endpoints in Firepower Management Center
Objective 4.4 - Describe using Cisco Threat Response for security investigations
Objective 4.3 - Implement Threat Intelligence Director for third-party security intelligence feeds
Objective 4.6 - Describe Rapid Threat Containment (RTC) functionality within Firepower Management Center
NEW QUESTION # 117
Which Cisco Firepower rule action displays an HTTP warning page?
- A. Allow with Warning
- B. Interactive Block
- C. Monitor
- D. Block
Answer: B
NEW QUESTION # 118
Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.)
- A. virtual links
- B. SHA authentication to OSPF packets
- C. OSPFv2 with IPv6 capabilities
- D. MD5 authentication to OSPF packets
- E. area boundary router type 1 LSA filtering
Answer: A,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/ospf_for_firepower_threat_defense.html
NEW QUESTION # 119
With Cisco FTD integrated routing and bridging, which interface does the bridge group use to communicate with a routed interface?
- A. bridge virtual
- B. subinterface
- C. switch virtual
- D. bridge group member
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/transp
NEW QUESTION # 120
Refer to the exhibit.
And engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network How is the Firepower configuration updated to protect these new operating systems?
- A. The administrator manually updates the policies.
- B. The administrator requests a Remediation Recommendation Report from Cisco Firepower
- C. Cisco Firepower gives recommendations to update the policies.
- D. Cisco Firepower automatically updates the policies.
Answer: C
Explanation:
Explanation
Ref:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Tailori
NEW QUESTION # 121
An engineer has been tasked with providing disaster recovery for an organization's primary Cisco FMC. What must be done on the primary and secondary Cisco FMCs to ensure that a copy of the original corporate policy is available if the primary Cisco FMC fails?
- A. Connect the primary and secondary Cisco FMC devices with Category 6 cables of not more than 10 meters in length.
- B. Place the active Cisco FMC device on the same trusted management network as the standby device
- C. Restore the primary Cisco FMC backup configuration to the secondary Cisco FMC device when the primary device fails
- D. Configure high-availability in both the primary and secondary Cisco FMCs
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/firepower_management_center_high_availability.html
NEW QUESTION # 122
Which two statements about deleting and re-adding a device to Cisco FMC are true? (Choose two.)
- A. No option to re-apply NAT and VPN policies during registration is available, so users need to re-apply the policies after registration is completed.
- B. No option to delete and re-add a device is available in the Cisco FMC web interface.
- C. The Cisco FMC web interface prompts users to re-apply access control policies.
- D. An option to re-apply NAT and VPN policies during registration is available, so users do not need to re- apply the policies after registration is completed.
- E. Before re-adding the device in Cisco FMC, you must add the manager back in the device.
Answer: A,C
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Device_Management_Basics.html
NEW QUESTION # 123
How many report templates does the Cisco Firepower Management Center support?
- A. unlimited
- B. 0
- C. 1
- D. 2
Answer: A
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Working_with_Reports.html
NEW QUESTION # 124
In a multi-tenant deployment where multiple domains are in use. which update should be applied outside of the Global Domain?
- A. local import of intrusion rules
- B. minor upgrade
- C. local import of major upgrade
- D. Cisco Geolocation Database
Answer: D
NEW QUESTION # 125
Which CLI command is used to control special handling of ClientHello messages?
- A. system support ssl-client-hello-display
- B. system support ssl-client-hello-tuning
- C. system support ssl-client-hello-enabled
- D. system support ssl-client-hello-force-reset
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config-guide-v61/firepower_command_line_reference.html
NEW QUESTION # 126
Refer to the exhibit.
And engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network How is the Firepower configuration updated to protect these new operating systems?
- A. The administrator manually updates the policies.
- B. The administrator requests a Remediation Recommendation Report from Cisco Firepower
- C. Cisco Firepower gives recommendations to update the policies.
- D. Cisco Firepower automatically updates the policies.
Answer: C
Explanation:
Explanation
Ref:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Tailori
NEW QUESTION # 127
Which command-line mode is supported from the Cisco Firepower Management Center CLI?
- A. configuration
- B. privileged
- C. user
- D. admin
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/660/configuration/guide/fpmc-config- guide-v66/command_line_reference.pdf
NEW QUESTION # 128
Which CLI command is used to control special handling of ClientHello messages?
- A. system support ssl-client-hello-display
- B. system support ssl-client-hello-tuning
- C. system support ssl-client-hello-enabled
- D. system support ssl-client-hello-force-reset
Answer: C
NEW QUESTION # 129
Which two deployment types support high availability? (Choose two.)
- A. transparent
- B. virtual appliance in public cloud
- C. routed
- D. intra-chassis multi-instance
- E. clustered
Answer: A,C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config-guide-v61/firepower_threat_defense_high_availability.html
NEW QUESTION # 130
In which two ways do access control policies operate on a Cisco Firepower system? (Choose two.)
- A. Traffic inspection can be interrupted temporarily when configuration changes are deployed.
- B. File policies use an associated variable set to perform intrusion prevention.
- C. The system performs intrusion inspection followed by file inspection.
- D. The system performs a preliminary inspection on trusted traffic to validate that it matches the trusted parameters.
- E. They can block traffic based on Security Intelligence data.
Answer: A,E
Explanation:
Section: Configuration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Access_Control_Using_Intrusion_and_File_Policies.html
NEW QUESTION # 131
An engineer must configure a Cisco FMC dashboard in a multidomain deployment Which action must the engineer take to edit a report template from an ancestor domain?
- A. Add it as a separate widget.
- B. Copy it to the current domain
- C. Change the document attributes.
- D. Assign themselves ownership of it
Answer: B
NEW QUESTION # 132
An engineer integrates Cisco FMC and Cisco ISE using pxGrid. Which role is assigned for Cisco FMC?
- A. controller
- B. server
- C. client
- D. publisher
Answer: C
NEW QUESTION # 133
A company is in the process of deploying intrusion protection with Cisco FTDs managed by a Cisco FMC.
Which action must be selected to enable fewer rules detect only critical conditions and avoid false positives?
- A. Balanced Security and Connectivity
- B. No Rules Active
- C. Maximum Detection
- D. Connectivity Over Security
Answer: D
NEW QUESTION # 134
A security engineer is deploying a pair of primary and secondary Cisco FMC devices. The secondary must also receive updates from Cisco Talos. Which action achieves this goal?
- A. Manually import rule updates onto the secondary Cisco FMC device.
- B. Force failover for the secondary Cisco FMC to synchronize the rule updates from the primary.
- C. Configure the secondary Cisco FMC so that it receives updates from Cisco Talos.
- D. Configure the primary Cisco FMC so that the rules are updated.
Answer: D
NEW QUESTION # 135
On the advanced tab under inline set properties, which allows interfaces to emulate a passive interface?
- A. strict TCP enforcement
- B. TAP mode
- C. propagate link state
- D. transparent inline mode
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config- guide-v64/inline_sets_and_passive_interfaces_for_firepower_threat_defense.html
NEW QUESTION # 136
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 137
An engineer is setting up a new Firepower deployment and is looking at the default FMC policies to start the implementation During the initial trial phase, the organization wants to test some common Snort rules while still allowing the majority of network traffic to pass Which default policy should be used?
- A. Balanced Security and Connectivity
- B. Security Over Connectivity
- C. Maximum Detection
- D. Connectivity Over Security
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-intrusion.html
NEW QUESTION # 138
A mid-sized company is experiencing higher network bandwidth utilization due to a recent acquisition The network operations team is asked to scale up their one Cisco FTD appliance deployment to higher capacities due to the increased network bandwidth. Which design option should be used to accomplish this goal?
- A. Deploy multiple Cisco FTD appliances using VPN load-balancing to scale performance.
- B. Deploy multiple Cisco FTD appliances in firewall clustering mode to increase performance.
- C. Deploy multiple Cisco FTD HA pairs in clustering mode to increase performance
- D. Deploy multiple Cisco FTD HA pairs to increase performance
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/clustering/ftd-cluster-solution.html#concept_C8502505F840451C9E600F1EED9BC18E
NEW QUESTION # 139
......
Quickly and Easily Pass Cisco Exam with 300-710 real Dumps: https://www.getvalidtest.com/300-710-exam.html
Realistic 300-710 Dumps Questions To Gain Brilliant Result: https://drive.google.com/open?id=1c_3rl3SJ72RDS9u8wgBK0hpeht7O4iwF